User manual AEG-ELECTROLUX EH64DG

[. . . ] The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells. Never use the hood for purposes other than for which it has ben designed. Never leave high naked flames under the hood when it is in operation. Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides. [. . . ] By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. 1 15 24 25 1 1 1 1 1 1 1 1 2 1 1 2 Product Components Hood Canopy complete with: Controls, Lights, Filters Telescopic chimney made up of: Upper chimney Lower chimney Telescopic frame complete with Suction fan, made up of: Upper frame Lower frame Reduction flange ø 150-120 mm Damper ø 150 Air Outlet Connector Extension Air Outlet Connector Connection box Hose clamps (not included) Installation Components Air Outlet Connector fixing bracket Wall Plugs ø 10 Screws 2, 9 x 6, 5 Screws 2, 9 x 9, 5 Screws M4 x 80 Screws M6 x 80 Screws 5, 2 x 70 Screws 3, 5 x 9, 5 Drilling template 6. Use a plumb line to mark the centre of the hob on the ceiling/support shelf. Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. For wooden beam ceilings, drill according to the wood screws used. For the power supply cable feed, drill ø 10 mm. Insert two screws of the following type, crossing them and leaving 4-5 mm from the ceiling: · For concrete ceilings, use the appropriate plugs for the screw size (not provided). For Cavity ceiling with inner space, with wall thickness of approx. For wooden beam ceilings, use 4 wood screws (not provided). For wooden shelf, use 4 screws 12g with washers 22 and nuts 23, provided. After 5 minutes the speed will return automatically to the one set before. This function can be deactivated by pressing the button again (the decimal point at the centre of the display will flash). Enables automatic delayed shutdown of the appliance (Delay), with a delay that depends on the working speed set. Speed 1 delay 20 minutes Speed 2 delay 15 minutes Speed 3 delay 10 minutes The proposed delay time can be changed by pressing the button successively and selecting one of the options available (5, 10, 15, 20, 25 and 30 minutes). at the end of the time selected the appliance will turn off automatically. To deactivate this function, simply press the button until the option selected is 0 or turn the motor off. Displays the time remaining before the hood turns off (countdown) and the Set speed. The spot at the bottom right flashes Turns the hob lighting system on and off Indicates the need to wash the metal grease filters. The alarm is triggered after the Hood has been in operation for 100 working hours. This indication is only visible when the motor is turned off. To reset the alarm: Turn the motor off and press button D for approximately 3 seconds, until the display turns off. [. . . ] They need to be washed when F-sign appears on the display or in any case every 2 months, or even more frequently in case of particularly intensive use of the hood. Remove the filters one by one pushing them towards the back side of the hood unit and simultaneously pulling downwards. Any kind of bending of the filters has to be avoided when washing them. Before fitting them again into the hood make sure that they are completely dry. [. . . ]