User manual AEG-ELECTROLUX EHD620P

[. . . ] 6 Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . 14 Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The power function is carried out but the heat setting 9 of one of the cooking zones and the power function for the other cooking zone of the pair exceed the maximum power for both at the same time. For this purpose, the power management reduces the power of the cooking zone that switched on first from 9 to example 5 and the display of this cooking zone changes between 9 and 5 and then stays at the current possible maximum 5. (If the display changes between 9 and 5 or 9 and 3 or another value depends on the type of appliance and the size of the cooking zone. ). The maximum power is reached when the heat setting 9 has been set for all cooking zones. Two cooking zones generate a pair (see figure) and therefore, the power management shares the maximum available power between these cooking zones. When the power function is selected for one cooking zone, the power management makes the additional power for this cooking zone available by reducing the power of the corresponding other cooking zone. electrolux 11 Using the timer Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Countdown timer cooking zones not in use 3 If just one countdown value is set you 3 If a heat setting is set on this cooking 3 If a cooking zone is switched off, the Step 1. Touch Control panel once can change it only when the appliance is switched on. zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. timer function set is also switched off. Selecting a cooking zone Display Pilot light of the first cooking zone flashes 2. Touch once Pilot light of the second cooking zone flashes 3. Touch once Pilot light of the third cooking zone flashes 4. Touch once Pilot light of the fourth cooking zone flashes 3 If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. 12 electrolux Setting the time Step 1. Control panel Select Touch cooking zone or Indicator Pilot light for the cooking zone selected flashes 00 to 99 minutes After a few seconds the pilot light flashes more slowly. Switching off the timer function Step 1. Control panel Select Touch cooking zone Indicator Pilot light of cooking zone selected flashes faster Time remaining is displayed The time remaining counts backwards to 00. The pilot light goes out. Place a scraper on the glass ceramic surface at an angle. Remove residues by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little washing up liquid. Rub the appliance dry using a clean cloth. Remove Type of dirt sugar, food containing sugar plastics, tin foil limescale and water rings fat splashes shiny metallic discolouration 1 Warning!Sharp objects and abrasive heat. imme- when the appliance has diately cooled down yes yes ----------yes yes yes using a scraper* cleaner for glass ceramic or stainless steel* *Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops 3 Remove stubborn residues with a clean3 Scratches or dark stains on the glass er for glass ceramic or stainless steel. ceramic that cannot be removed do not however affect the functioning of the appliance. electrolux 17 What to do if . . . Problem Possible cause Remedy Switch the appliance on again. The appliance cannot be switched More than 10 seconds have on or is not operating passed since the appliance was switched on The lock is switched on Switch off the lock (See the section "Locking/unlocking the control panel") The child safety device is switched Deactivate child safety device (See on the section "Child safety device") Several sensor fields were touched at the same time Only touch one sensor field Automatic switch off has been trig- Remove any objects (pan, cloths, gered etc. ) that are lying on the control panel. Switch the appliance on again Dirty control panel The residual heat indicator is not displaying anything The cooking zone was only on for a short time and is therefore not hot The sensor fields must be dry and fat-free. If the cooking zone is supposed to be hot, call the Customer Service Department. Uncover sensor field Repeated acoustic signal (6x), ap- One or more sensor fields have pliance switches off been covered for longer than 10 seconds Acoustic signal sounds when appliance is switched off The control panel is wholly or part- Remove objects. Do not place any objects on the control panel Acoustic signal sounds and appli- The On/Off sensor field has been ance switches itself on and then covered up, e. g. [. . . ] ­ For the four corners of the rabbet the ends of the sealing tapes must be cut into mitres. ­ Stick the sealing tape flush into the corner of the rabbet, so that no silicon compound can get under the glass ceramic when grouting. ­ Don't stretch the tapes when sticking them on. 22 electrolux Assembly electrolux 23 24 electrolux 1 WARNING!Surface temperature of base exceed 95°C, under bench access must be restricted by use of non-combustible barrier on installation. Rating Plate EHD60150I 55GADD5AU ELECTROLUX 230 V 50 Hz 949 592 874 Induction 7, 4 kW 7, 4 kW electrolux 25 Guarantee/Customer Service Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: ELECTROLUX This document sets out the terms and conditions of product warranties for Electrolux branded appliances. [. . . ]