User manual AEG-ELECTROLUX EHD621P

[. . . ] 18 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. [. . . ] • The relation between heat setting and times of the Automatic Switch Off function: • , — 6 hours • • • — 5 hours — 4 hours — 1. 5 hours . To activate the Bridge function touch To set or change the heat setting touch one of the control sensors. To deactivate the Bridge function touch . The cooking zones operate independently. When you use only one cooking zone of the pair we recommend that you use the rear cooking zone. Also when you use large cookware we recommend that you put it near to the rear cooking zone. 4. 5 Automatic Heat Up You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the diagram), and then decreases to the necessary heat setting. To start the Automatic Heat Up function for a cooking zone: 1. 4. 3 The heat setting Touch the control bar at the heat setting. Change clockwise or counterclockwise, if it is necessary. Do not release before you have a correct heat setting. The display shows the heat setting. Touch ( comes on in the display). • Deactivate the appliance with . Activation of the sounds Deactivate the appliance. The displays for 3 seccome on and go out. HELPFUL HINTS AND TIPS INDUCTION COOKING ZONES For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. 5. 1 Cookware for induction cooking zones Use the induction cooking zones with correct cookware. ENGLISH 11 Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is correct for an induction hob if … • . . . some water boils very quickly on a zone set to the highest heat setting. a magnet pulls on to the bottom of the cookware. The bottom of the cookware must be as thick and flat as possible. Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. • hissing, buzzing: the fan operates. The noises are normal and do not refer to appliance malfunction. 5. 4 Energy saving How to save energy • If it is possible, always put the lids on the cookware. • Put cookware on a cooking zone before you start it. [. . . ] • Appliance hasn't been serviced, maintained, repaired, taken apart or tampered with by person not authorised by us. • Electrolux Service Force Centre must undertake all service work under this guarantee • Any appliance or defective part replaced shall become the Company's property. • This guarantee is in addition to your statutory and other legal rights. "What to do if. . . When you contact the Service Force Centre you will need to give the following details: Your name, address and postcode, your telephone number, clear concise details of the fault, model and serial number of the appliance (found on the rating plate), the purchase date. [. . . ]