User manual AEG-ELECTROLUX EHD6675X

[. . . ] C e r a m i c g l a s s i n d u c t i o n h o b Installation and Operating g Instructions EHD 6675 X / EHD 6675 U 319 651 800-NO-201102-03 Dear customer, Please read these operating instructions carefully. Pay particular attention to the section "Safety information" on the first few pages. Please retain these operating instructions for later reference. Pass them on to possible new owners of the appliance. The following symbols are used in the text: 1 Safety instructions 3 Information and practical tips 2 Environmental information Warning: Information concerning your personal safety. [. . . ] Touch the , , lock" sensor field until the control indicator comes on. To release the lock touch the , , lock" sensor field again continuously until the control indicator goes out. 3 Child safety feature!If the hob issensor field completely switched off using the "On/Off" while the lock is on, then the lock will still be active when the hob is switched on again. To reactivate the cooking zones, the locking function must be cancelled as described above. 16 Timer A cooking duration can be set with the integrated timer for all cooking zones. When the end of the cooking duration is reached, the cooking zone switches itself off automatically. Using the cooking zone sensor field, select the required cooking zone and set the required heat setting. Touch the TIMER W sensor field to activate the timer function for this cooking zone. 00 will appear in the display. 3 To set the timer more quickly, leave your finger 3. Using the + or - sensor fields set or adjust the required period of time until the zone is to switch off automatically (eg. After a few seconds the timer will start automatically and will show how much time remains before it will switch off. In addition, the "Timer active" display for the relevant cooking zone will light up, e. g. the top left control indicator corresponds to the rear left cooking zone. At the end of the set cooking time, the cooking zone will switch off automatically and an acoustic signal will sound. Touch the TIMER W sensor field to switch off the signal and control indicator. on the + or - sensor field until the required time is reached. If the - sensor field is operated first, the time setting will begin at 99 minutes; if the + sensor field is operated first, the time setting will begin at 1 minute. 17 Displaying the remaining cooking time If you select a cooking zone which is in timer mode, the cooking time still remaining appears in the timer display window. Using the timer to measure short periods of time ("Minute Minder"). the Timer!the cooking zones should None of be set with 1. Touch the "On/Off" sensor field for around two seconds. Touch the TIMER W sensor field to activate the Timer function. Using the + or - sensor fields, set the desired length of time (for example, 20 minutes). The Timer begins to run after a few seconds, and indicates the time remaining. [. . . ] The appliance must be installed and operated in accordance with the Company's instructions. This Warranty does not apply to normal wear and tear, or any service, which is needed after an accident, negligence, alteration or misuse. This Warranty also does not apply to damage caused if your appliance has been dismantled, repaired or serviced by any person other than someone authorised by the Company. If you live outside the service area of the Company or its Authorised Service Centre, this warranty does not cover the cost of transport of the appliance for service nor the Authorised Service Centre's travelling costs to and from your home. [. . . ]