User manual AEG-ELECTROLUX EHG7762X

[. . . ] Gas hob - xc INSTRUCTION BOOKLET Mod. /Mo. EHG 7762 35687-2502 CZ-HR-SK-SLO-RO-RU ENGLISH Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. About Installation, Cleaning and Manteinance · It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. [. . . ] Carefully wash the stainless steel components with water, then wipe them dry with a soft cloth. If the marks are particularly difficult to remove, use common non-abrasive cleaners or specific products. Never use steel wool pads or acids. Cast Iron Pan Supports The hob has cast iron pan supports. They are fair heavy and could damage the hob or your kitchen furniture if you let them fall down. To keep the pan supports in the correct position, they are hooked into hinges at the back of the hob. Thanks to these hooks, you can lift the pan supports for easier cleaning. When removing the pan supports, lift them up as shown in Fig. Never turn the pan supports on the hinges, this could damage them (Fig. This keeps the pan supports fixed in place when the central burner is in use. Wash the pan supports using hot soapy water. If necessary, a paste cleaner or a soap impregnated steel wool pad can be used with caution. After cleaning, be sure to wipe dry with a soft cloth. YES Fig. 2 NO The Burners The burner caps and crowns (Fig. Wash the burner caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove. After cleaning, be sure to wipe dry with a soft cloth. Ignition electrode The electric ignition is obtained through a ceramic "electrode" and a metal electrode (Fig. Keep these components very clean, to avoid lighting difficulties, and check that the burner crown holes are not obstructed. Fig. 3 5 Periodic Maintenance Periodically ask your local Service Centre to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. To ensure the good operation of the hob and its safety features, it is necessary that the taps are periodically lubricated. " The periodic lubrication of the taps must be carried out by qualified personnel, which you must refer to also in case of malfunctioning. When removing the cast iron pan supports, lift them up as shown in Fig. Never turn the pan supports on the hinges as shown in Fig. [. . . ] If changing from natural gas 20 mbar to natural gas 13 mbar undo the by-pass screw about 1/4 of a turn. If changing from liquid gas to natural gas 13 mbar, undo the by-pass screw about 3/4 of a turn. · Finally check the flame does not go out when quickly turning the knob from the maximum position to the minimum position. This procedure can easily be carried out, anyhow the hob has been positioned or built in the working top. [. . . ]