User manual AEG-ELECTROLUX EHI6740FOK

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] You do not set the heat setting after you activate the appliance. ⷠYou spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. Before you use the appliance again, wait for the cooking zone to cool down. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. ⷠYou do not deactivate a cooking zone or change the heat setting. After some time comes on and the appliance deactivates. The relation between heat setting and times of the Automatic Switch Off function: · -- 5 hours -- 4 hours -- 1. The Bridge function connects two cooking zones and they operate as one. First set the heat setting for one of the cooking zone. To activate the Bridge function touch To set or change the heat setting touch one of the control sensors. You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the diagram), and then decreases to the necessary heat setting. Immediately touch the necessary heat setting. After 5 seconds comes on in the display. Touch the control bar at the heat setting. change clockwise or counterclockwise , if it is necessary. Do not release before you have a correct heat setting. Use the Count Down Timer to set how long the cooking zone operates for only this one time. set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. ⷠTo set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. When the indicator of the cooking zone start to flash slow, the time counts down. [. . . ] The magnetic part of the bottom of the cookware must be 125 mm minimum. induction cooking zones adapt to the dimension of the bottom of the cookware automatically. You can cook with the large cookware on two cooking zones at the same time. To save energy, the heater of the cooking zone deactivates before the count down timer sounds. [. . . ]