User manual AEG-ELECTROLUX EHL605

[. . . ] 5 Description of appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before the first use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the appliance is damaged please immediately inform the forwarding company before the appliance is connected. The packing material should be disposed properly. DESCRIPTION OF THE HOB EHH 800 X 1) Cooking zone (double circuit zone) 2) Cooking zone 120/210 mm 145 mm 2100 W 1200 W 2200 W 1800 W 120 W 2 3 3) Cooking zone 170 x 265 mm (double circuit zone) 4) Cooking zone (halogen) 5) Warming zone 6) Residual heat indicator 180 mm H 1 6 4 5 BEFORE THE FIRST USE Clean your ceramic hob thouroughly before its first use. Then clean it regularly when it it is just warm or cold. Ceramic hobs are treated and cleaned the same way as glass. When you use the ceramic hob for the first time it can temporarely emit an odeur caused by the vaporation of water in the isolation. 5 TECHNICAL DATA Hob dimensions length width height length width 795 mm 515 mm ~43 mm 780 mm 500 mm Rating plate Cutout dimensions Voltage Total power 220-230 V ~ 50 Hz 7. 42 kW Typ Instr. 220-230 V ~ 50 Hz SWISS MADE Prod. No. 941 592 622 7. 42 kW OPERATING INSTRUCTIONS Cooking zones The cooking zones are clearly marked on the ceramic surface. Only the cooking zone which is switched on will be heated up. Double circuit cooking zone If the second circle of the two-circuit cooking zones (No. 2 and 3) is needed, the control knob concerned has to be turned over position "10" to the final stop from where it automatically springs back to position "10". The temperature can now be controlled by turning back the knob in the opposite direction to the wanted position. Setting it back to "0" turns off the cooking zone. Burnt soiling has to be removed with a scraper. Afterwards wipe off the ceramic hob with a damp cloth. Stain removal Light metallic stains (aluminium remains) can be removed from the cooled down cooking zone with a special detergent. Calcareous deposits (caused by overboiling water) can be removed with vinegar or a special detergent. Removal of sugar, sugar-containing food, plastic objects or kitchen foil The cooking zone involved must not be turned off!The remains have to be scraped off the hot cooking zone immediately with a scraper. The cooking zone can be switched off after the removal of the soiling. It may be cleaned with a special detergent after it has cooled down. The mentioned detergents are available in supermarkets, electrical shops, drug stores, grocery stores and kitchen studios. Scrapers are available in craft shops and department stores as well as in decoration stores. Do not apply detergents on hot cooking zones. [. . . ] Attention: If installed in stone, ceramic tiles or lava worktops (fig. 3), the fixing ressorts will not be fastened. Instead, silicone will be put under the cover frame. To avoid that silicone runs down between the glass ceramic hob and the worktop (fig. 4 - pos. 1) a sealing will be glued to the ceramic hob (fig. 4 - pos. 2). The sealing can be ordered free of charge under article no. [. . . ]