User manual AEG-ELECTROLUX EHL610

[. . . ] . electrolux 11 1 1-3 1-3 4-6 4-6 5-7 5-7 8-9 10-11 11-12 : , : , , : , , , , , : , , , , , , , , , , , , 5-25 10-40 25-50 20-45 20-60 60-150 5-15 , . 750g ¼ L 3 L , , , ( ) . , 3 ( ) . . Thinking of you. Share more of our thinking at www. electrolux. com CONTENTS Safety information Installation instructions Description of the appliance Operating the appliance 13 14 16 16 Helpful hints and tips 16 Care and cleaning 17 What to do if. . . [. . . ] Do not let electricity bonds touch the appliance or hot cookware. How to prevent a damage to the appliance · If the objects or cookware fall on the glass ceramic, the surface can be damaged. · Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if you move them on the surface. · Do not let cookware boil dry to prevent the damage to cookware and glass ceramics. · Do not use the cooking zones with empty cookware or without cookware. · Do not cover any part of the appliance with aluminium foil. If there is a crack on the surface, disconnect power supply to prevent the electric shock. 14 electrolux INSTALLATION INSTRUCTIONS Before the installation , note down the serial number (Ser. The rating plate of the appliance is on its lower casing. EHL610 58 EED D1 KO 220 V ELECTROLUX 60 Hz 949 594 219 01 2, 8 kW cookware can be hit off the hob when you open doors or windows. Carefully obey the instructions for electrical connections. · The electrical mains terminal is live. · Make electrical mains terminal free of voltage. Seal the appliance to the work top with no space left with a correct sealant!Protect the bottom of the appliance from steam and moisture, e. g. Do not install the appliance adjacent to doors and below windows!If not, hot electrolux 15 Assembly min. 50mm R 5mm = 600mm 270+1mm 490+1mm = min. 28 mm 16 electrolux DESCRIPTION OF THE APPLIANCE Cooking surface layout 180 mm 1 145 mm 2 3 1 2 3 4 Rear cooking zone 1700 W Front cooking zone 1100 W Residual heat indicators Control knobs 4 Hob cooking zone control knob 1 1 Assignment of control knobs 2 Heat setting (0-12) 2 Residual heat indicator The residual heat indicator comes on when a cooking zone is hot. Warning!Risk of burns from residual heat! OPERATING THE APPLIANCE To switch on and increase the heat setting turn the knob clockwise. To decrease the heat setting turn the knob counter-clockwise. When a cooking zone operates, it hums for a short time. This is typical of all ceramic glass cooking zones and does not show that the appliance operates incorrectly. HELPFUL HINTS AND TIPS Cookware · The bottom of the cookware must be as thick and flat as possible. · Cookware made of enamelled steel and with aluminium or copper bottoms can cause discoloration on glass ceramic surface. [. . . ] Possible cause and remedy · Set the heat setting. · Examine the fuse in the electrical system of the house in the fuse box. If the fuses blow time after time, speak to an authorised electrician. The cooking zone is not hot because it operated only for a short time. [. . . ]