User manual AEG-ELECTROLUX EHS7621X

[. . . ] We promise that it will provide a superior User Experience delivering Ease-of-Mind. Good luck! 4 electrolux Contents Safety instructions Description of the Appliance Operating the appliance Tips on Cooking and Frying Cleaning and Care What to do if . . . 5 7 10 19 22 24 Disposal Installation Instructions Guarantee/Customer Service Service Assembly Rating Plate 26 27 28 30 91 94 The following symbols are used in this user manual: 1 3 2 Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information electrolux 5 Safety instructions Please comply with these instructions. [. . . ] Control panel Select Indicator cooking zone Pilot light of the selected cooking zone flashes faster Time remaining is displayed or 2. Touch 01 to 99 minutes After a few seconds, the pilot light flashes more slowly. Displaying the time remaining for a cooking zone Step 1. Control panel field Display Select cooking zone Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step 1. Control panel field Touch Acoustic signal Acoustic signal to acknowledge. Acoustic signal stops. 18 electrolux operating the appliance Safety cut-out Cooking surface · If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. · If one or more sensor fields are covered by objects (a pan, cloths, etc. ) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically. · If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. Control panel · When the appliance is switched off, if one or more of the sensor fields on the control panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap. Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened. Loose and inappropriate plug and socket connections can make the terminal overheat. · Have the clamping joints correctly installed by a qualified electrician. · Use strain relief clamp on cable. · In the event of single-phase or twophase connection, the appropriate mains cable of type H05BB-F Tmax 90°C(or higher) must be used. · If this appliance's mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax 90°C; or higher). The latter is available from the Customer Care Department. [. . . ] Nor will the guarantee cover those caused by inadequate installation or assembly, lack of maintenance or failure to respect the assembly instructions or directions for use. Defects that result from repairs or measures carried out by people who are not qualified or expert or defects that result from the addition of non-original accessories or spare parts are not covered by the guarantee. Appliances that are easy to transport may be delivered or sent to the consumer services department. Home repairs are only anticipated for bulky appliances or built-in appliances. [. . . ]