User manual AEG-ELECTROLUX EHS8670P

[. . . ] P l G a l Ceramic ca em v askeram Glaske i i r glass ho dro cerâ sk-kogez amikhäll b m o i n co e Installation and Operating Instructions Montagem e indicações de utilização Monterings- og brugsanvisning Installations- och bruksanvisning EHS 8670 P 822 924 215-NO-A-050603-01 g p k s Dear customer, Please read these operating instructions carefully. Pay particular attention to the section "Safety information" on the first few pages. Please retain these operating instructions for later reference. Pass them on to possible new owners of the appliance. The following symbols are used in the text: 1 Safety instructions 3 Information and practical tips 2 Environmental information Warning: Information concerning your personal safety. [. . . ] Press the + and - buttons simultaneously to switch off. 1 When the rings are still hot cooking should be carried out without automatic warm up. Locking/Unlocking the Control Panel With the exception of the "On/Off" sensor field the control panel can be locked at any required time during cooking in order to prevent adjusting the settings such as when wiping over with a cloth. This function is also suitable as a child safety feature. Touch the , , lock" sensor field until the control indicator comes on. To release the lock touch the , , lock" sensor field again continuously until the control indicator goes out. 3 Child safety feature!If the hob issensor field completely switched off using the "On/Off" while the lock is on, then the lock will still be active when the hob is switched on again. To reactivate the cooking zones, the locking function must be cancelled as described above. 15 Timer A cooking duration can be set with the integrated timer for all cooking zones. When the end of the cooking duration is reached, the cooking zone switches itself off automatically. Using the cooking zone sensor field, select the required cooking zone and set the required heat setting. Touch the TIMER W sensor field to activate the timer function for this cooking zone. Using the + or - sensor fields set or adjust the required period of time until the zone is to switch off automatically (eg. After a few seconds the timer will start automatically and will show how much time remains before it will switch off. In addition, the "Timer active" display for the relevant cooking zone will light up. At the end of the set cooking time, the cooking zone will switch off automatically and an acoustic signal will sound. Touch the TIMER W sensor field to switch off the signal and control indicator. 3 To set the timer more quickly, until the required leave your finger on the + or - sensor field time is reached. If the - sensor field is operated first, the time setting will begin at 99 minutes; if the + sensor field is operated first, the time setting will begin at 1 minute. 16 Displaying the remaining cooking time If you select a cooking zone which is in timer mode, the cooking time still remaining appears in the timer display window. Using the timer to measure short periods of time ("Minute Minder"). 1 Important!the Timer!the cooking zones should None of be set with 1. Touch the "On/Off" sensor field for around two seconds. Touch the TIMER W sensor field to activate the Timer function. Using the + or - sensor fields, set the desired length of time (for example, 20 minutes). The Timer begins to run after a few seconds, and indicates the time remaining. When the set time has elapsed, an audible signal is sounded. Touch the TIMER W sensor field, to switch off the signal. Ending the timer function prematurely There are two ways of switching off the timer early: Switching off the cooking zone and timer simultaneously 1. [. . . ] Stick these on underneath the cooking surface along the outer edge of the ceramic glass hob top. The ends of the sealing tapes must overlap. 25 Electrical Connection Before connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob. The appliance also works perfectly on older networks with AC220V~. [. . . ]