User manual AEG-ELECTROLUX EHS90270X

[. . . ] user manual Ceramic glass hob EHS90270X 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Installation Description of the appliance Operating the appliance 2 3 5 6 Helpful hints and tips Care and cleaning What to do if. . . Environment concerns 8 9 9 10 Subject to change without notice Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. [. . . ] Automatic Switch Off times Heat setting Stops after 6 hours 5 hours 4 hours · you cover a sensor field with an object (a pan, a cloth, etc. ) for longer than 10 seconds. The sound operates some time and the hob stops. Remove the object or clean the control panel. · you do not stop a cooking zone or change the heat setting. After some time comes on and the hob stops. See the table. 1. 5 hours The heat setting The time of the automatic heat up changes for different heat settings. 11 10 9 8 7 6 5 4 Touch the control bar at the necessary heat setting. The Automatic heat up The Automatic heat up function sets the highest heat setting for some time, and then decreases to the necessary level. You can get a necessary heat setting in a shorter time. The display of the heat setting comes on. The display of automatic heat up function comes on and after some time goes out. 3 2 1 0 1 2 3 4 5 6 7 8 9 Using the Timer Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session. Set the Count Down Timer after the selection of the cooking zone. electrolux 7 You can set the heat setting before or after you set the timer. · Selection of the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. · Starting the Count Down Timer: touch of the timer to set the time ( 00 - 99 minutes). When the indicator of the cooking zone flashes slower, the time counts down. · Checking the remaining time: select the cooking zone with . The indicator of the cooking zone flashes faster. · Changing the Count Down Timer: select the cooking zone with touch or . · Stopping the timer: select the cooking zone with . The remaining time counts backwards to 00 . The indicator of the cooking zone goes out. To switch off You can also touch and at the same time. When the time elapses, the sound operates and 00 flashes. [. . . ] See the section "Child safety device" or "Stop and go". · You touched 2 or more sensor fields at the same time. · There is water or fat stains on the control panel. Clean the control panel You covered one or more sensor fields. [. . . ]