User manual AEG-ELECTROLUX EIW60002X

[. . . ] Instruction manual REFRESHMENT CENTER Built-in appliance welcome to the world of Electrolux electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. [. . . ] 4 installation electrolux 11 2 Water mains and siphon connection Warning Connect only to potable water mains. All water mains connections should be carried out by a certified plummer. Warning Water mains pressure can be set through the H2O pressure regulator placed near the CO2 bottle. Pressure should be no higher than 3. 0 bars and no lower than 2. 0 bars. 8): - Connect the flexible hose to the H2O inlet (Fig. 8) on the unit. - Connect discharge tube to discharge barbed connection on unit and to sink siphon (Fig. 8). Warning Please do not install Refreshment Center farther than 4 meters or please get longer inlet and discharge tubes. Fig. 8 Water discharge 3/4" Water Inlet 3/4" 12 electrolux installation 3 Install filter cartridge Lift locking spring placed under drip tray (Fig. On the left side of the unit please find the filter cartridge (Fig. 10 Remove filter plastic cap and install filter in filter head as shown on filter instruction booklet (Fig. 11 Open the on/off valve placed near the filter cartridge. 12 Check for water leaks and make sure the CO2 bottle is tightly fixed on the CO2 pressure regulator. Open the pressure regulator valve and set pressure to 3 bars on gauge. Pressure can be increased to 4 bars to increase carbonation levels (Fig. 13 installation electrolux 13 4 Startup Warning Before plugging unit to power supply, please check for correct power supply voltage and frequency as stated on Technical Characteristic chart (see page 9). Fig. 15 Connect unit to 230V through supplied cord. Electric supply circuit should conform to local laws and regulations. Warning The supplier declines any responsibility should any safety rule not be respected during installation. Turn unit on through main on/off switch on side of unit. The unit will undergo an initialization process which will take approx. After 4 minutes turn unit on through on/off button on touch control panel to activate all functions. 3 hours before the unit reaches final working temperatures in order to dispense cold water, carbonated water and ice-cubes. [. . . ] - Electrolux Service Force Centre must undertake all service work under this guarantee. - Any appliance or defective part replaced shall become the Company's property. - This guarantee is in addition to your statutory and other legal rights. Exclusions - Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. [. . . ]