User manual AEG-ELECTROLUX EMK1000

[. . . ] Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. Com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] Press OK button to switch off the sound and terminate the function. It is possible to deactivate the function at any time during the countdown: 1. Press the Mode button until the Minute Minder indicator flashes. It is possible to change the time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button. 7 Child Lock function To lock the buttons from unintentional operation select the Child Lock function. Press the Mode button until the corresponding icon appears. Press the Mode button until the Child Lock indicator flashes. 6 Minute Minder function The Minute Minder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down a mixture for a certain length of time, or when a reminder is needed in order not to forget the bottles placed in the freezer for fast cooling. Press the Mode button until the corresponding icon appears. 8 High temperature alarm Temperature increase in the freezer compartment (for example due to an earlier power failure or door is open) is indicated by: • flashing the alarm and freezer temperature indicators • sounding of buzzer. The freezer temperature indicator shows the highest temperature reached for a few seconds. At the time of its removal from the freezer, pull the basket towards yourself and, upon reaching the end point, remove the basket by tilting its front upwards At the time of putting it back, slightly lift the front of the basket to insert it into the freezer. Once you are over the end points, push the basket back in their position. The wire shelves equipped with expander rollers are secured with locking pins. To remove them proceed as follow: • Loosen the locking pin on each side on the expander roller. 6 Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. Check that the drain hose at the rear of the cabinet discharges into the drip tray ENGLISH 9 4. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save energy consumption. Take care of not to damage the cooling system. 1 Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. [. . . ] 7 Door reversibility 2 To change the opening direction of the door, do these steps: • Remove the plug from the power. • Remove the ventilation grille. Remove the filling and install it on the opposite side of the grille. €¢ Lay down the appliance back side down on a wooden support. [. . . ]