User manual AEG-ELECTROLUX EMM1000

[. . . ] If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard. Always place the appliance on a flat, level surface. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning. [. . . ] Place the screw ring on the cutter housing, turn it clockwise and make sure it is properly fastened. Gently push the meat into the cutter housing by using the pusher. (For steak tartare, mince the meat twice using the medium grinding disc. Place the sausage horn on the cutter housing and attach the screw ring. Attach the cutter housing to the motor unit and put the tray in place. Put the seasoned minced meat on the tray. Slide the wet skin onto the sausage horn, switch on the appliance and gently push down the meat into the cutter housing using the pusher. If the skin gets stuck onto the sausage horn, wet it with water. Put the separator into the worm shaft ­ make sure to place the knockout correctly. Attach the cutter housing to the motor unit and put the tray in place. Choose one of the four different shapes. The mixture is processed in the kebbe maker, cut into short lengths, stuffed with minced meat and then deep fried. Place the former on the cutter housing, fasten properly using the screw ring. Attach the cutter housing to the motor unit and put the tray in place. [. . . ] Wash the parts immediately after use in hot water using detergent. Rinseallparts in clear hot water and dry them immediately. Disposal Packaging materials The packaging materials are environ mentally friendly and can be recycled. [. . . ]