User manual AEG-ELECTROLUX ENB43499W

[. . . ] We recommend that you keep this user manual for future reference and pass it on to any future owners. After unpacking the appliance please check it is not damaged. If in doubt, do not use the appliance but contact your local Electrolux Customer Care Centre. Subject to change without notice Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers. [. . . ] A buzzer will tell you when the time is finished and the icon will flash until the alarm reset button is pressed. If your drink is not cold enough, reset the drinks chill function (remembering the drink is already partially chilled). Controlling the temperature We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 3°C and the freezer to -18°C. If you want to change the temperature, follow the instructions below. Make only small adjustments and wait 24 hours to see if it's correct. Checking the softness of ice cream is a good indication if your freezer is the right temperature, while feeling the coldness of water kept in the refrigerator is a good way of checking the temperature of the food compartment. NOTE: When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside each compartment may vary, depending on how much food you store and where you place it. High or low room temperature may also affect the actual temperature inside the refrigerator. changing the freezer temperature Press the freezer button to make the freezer colder in 1°C steps. Once the maximum of -23°C is reached, the display will return to -14°C with the next press of the button. Frost free refrigeration using your appliance 9 Modula bottle caddy The Modula bottle caddy is made of anodised aluminium. They are used to store various types of bottles like wine or beer. Bottles should be stored with the bottom end towards the back of the refrigerator. The fridge arrives with three combined caddies, but they can be separated if desired. Your Twist & serve ice can be relocated to the other side of the freezer as follows: 1. If the ice tray assembly is frozen to the carriage, simply squeeze the tray and shelf together to break the ice. Before you remove the ice carriage, remember to disengage it from the glass shelf (as shown), as it may result in damage to the assembly. Remove the centre runner by disengaging it at the front of the shelf, and removing it from the rear. Refit the runner in to the rear of the shelf on the right hand side and then engage the front (as shown) 5. Fit the carriage by sliding it into the runners until the front of the carriage engages with the shelf. Slide away glass shelf This shelf can be used either as a full depth shelf or when tall items need to be stored at the front of the appliance it can be collapsed to half its original depth. [. . . ] If you call a service person to solve this problem you will be charged for the cost of the service call, this is not a warranty fault. Check that the power cord is plugged into the power outlet properly and that the outlet is switched `ON'. Try running another appliance from the power outlet. If no power is coming from the outlet you may have blown a fuse or tripped a circuit of your household power supply. [. . . ]