User manual AEG-ELECTROLUX ENB 51811

[. . . ] Congratulations and thank you for choosing our products. We are sure you will find your new appliance a pleasure to use. Before you use the appliance, we recommend that you read through the entire user manual, which provides the description of the appliance and its functions. To avoid the risks that are always present when you use an electric appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. [. . . ] Bottles should be stored with the bottom end towards the back of the refrigerator. The fridge arrives with three combined caddies, but they can be separated if desired. yourTwist&serveicecanberelocatedtotheother side of the freezer as follows: 1. If the ice tray assembly is frozen to the carriage, simply squeeze the tray and shelf together to break the ice. Before you remove the ice carriage, remember to disengage it from the glass shelf (as shown), as it may result in damage to the assembly. Remove the centre runner by disengaging it at the front of the shelf, and removing it from the rear. Refit the runner in to the rear of the shelf on the right hand side and then engage the front (as shown) 5. Fit the carriage by sliding it into the runners until the front of the carriage engages with the shelf. Slide away glass shelf This shelf can be used either as a full depth shelf or when tall items need to be stored at the front of the appliance it can be collapsed to half its original depth. Pull the front half of the shelf forward. Insert into the slot at the rear of the shelf Then engage into the front of the shelf Storingvegetables Store vegetables in the crisper bin and remember to set the humidity control to more humid (closed). Storingfruit&smallgoods Store fruit and smallgoods in the crisper bin and remember to set the humidity control to less humid (open). Remove the crisper bin(s) by pulling forward, then up and forward again. Bottle twist holder operation (where fitted) The bottle twist holder is used to prevent bottles from falling over. The bottle twist holder consists of two parts, a sliding front, and a rotating retainer ring. The bottle twist holder can be used in two positions: · Horizontal When the bottle twist holder ring is horizontal, any item that fits within the ring can simply be placed inside it. They will affect the life of the plastic components and may taint stored food. doorstoragebins Your refrigerator is fitted with door storage bins. These bins adjust to meet different storage needs. all the door bins are completely removable for cleaning. If you want to remove or adjust a bin, lift it over the support lugs on the inner door panel. To replace, push the bin down over the support lugs to lock it in place. [. . . ] Other strange sounds may mean that you need to check and take action. For example, noises may mean that: · There are vibrations from an object on top of or behind or beside the refrigerator. Remember it is quite normal for noise to seem louder just after the refrigerator starts operating. Some containers and wrapping can cause odours. [. . . ]