User manual AEG-ELECTROLUX EOB3400BOR

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] To deactivate the appliance, turn the knob for the oven functions and the knob for the temperature to the Off position. To activate the oven lamp without a cooking function. The top and bottom heating elements operate at the same time. To grill flat food items in small quantities in the middle of the shelf. To grill flat food items in large quantities. The grill element and the oven fan operate one after the other and circulate hot air around the food. To roast or roast and bake food with the same cooking temperature on more than one oven level without flavour transference. The knob for the temperature must be in the off position To make pizza, quiche or pie. The grill and bottom element provide direct heat and the fan circulates the hot air to cook the pizza toppings or pie filling. 1 Analog timer The timer has these functions: • Time of day • Minute Minder + End of Cooking. Deactivating the acoustic signal Turn the settings knob counterclockwise, shows in the window. In this posiuntil tion there is no acoustic signal after the appliance deactivates. Use it to set the automatic switch-off time for an oven function. The maximum time you can set is 180 minutes. Use it only for food which you do not have to mix or monitor during the cooking procedure. set an oven function and the temperature. Turn the settings knob counterclockwise, until the necessary switch-off time (in minutes) shows in the window of the dial. After the time period is completed, an acoustic signal sounds. Setting the time of day To set the time of day, push and turn the settings knob counterclockwise (in the direction indicated by the arrow), until the clock hands are in the necessary position. Do not turn the settings knob clockwise. After you set the time, let the settings knob move to its initial position or carefully pull back. Normal setting Turn the settings knob counterclockwise, until shows in the window. [. . . ] 1 2 Installing the door and the glass panel When the cleaning is completed, install the glass panel and the oven door. Do the above steps in the opposite sequence. The screen-printing zone must face the inner side of the door. Make sure that after the installation the surface of the glass panel frame on the screen-printing zones is not rough when you touch it. [. . . ]