User manual AEG-ELECTROLUX EOC68342X

[. . . ] Safety information Product description Daily use Helpful hints and tips 2 5 5 13 Care and cleaning 14 What to do if. Before the installation and use, read this manual carefully: · For your personal safety and the safety of your property · Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage. Children and vulnerable people safety · Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. [. . . ] When ON you can choose Set+Go function in the Select Options window. When ON you can choose Heat+Hold function in the Select Options window. Touch OK to move to submenu or accept setting. At every point you can get back to the main . Automatic programmes These 3 automatic programmes give optimum settings for each type of meat or other recipes: · Meat programmes with Weight Automatic ( Assisted Cooking menu) · Meat programmes with Meatprobe Automatic ( Assisted Cooking menu) · recipe Automatic ( Assisted Cooking menu) Assisted Cooking with Weight Automatic This function automatically calculates the roasting time. To use the function, It is necessary to input the food weight. When time ends, an acoustic signal sounds. Touch a sensor field to deactivate the signal. With poultry programmes turn over the food after 30 minutes. Assisted Cooking with Recipe Automatic This appliance has a set of recipes you can use. Recipes are fixed and you cannot change them. When you set the option Manual , the display shows automatic settings but you can change them. Touch or to set the function Assisted Cooking , the necessary category and the dish. When the programme ends, an acoustic signal sounds. Use a sensor field to deactivate the acoustic signal. When the meat reaches set temperature the oven deactivates automatically. Only use the meat probe supplied or genuine replacement parts. Put the tip of the meat probe into the centre of the meat. Put the plug of the meat probe into the socket on the side wall of the oven. Touch + or - in less than 5 seconds to set the core temperature. The meatprobe must stay in the meat and in the meatprobe socket during the cooking process. When the meat reaches set core temperature, an acoustic signal sounds. [. . . ] Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb. New oven light bulb must have the same parameters as your previous one. Pull the front of the shelf support rail away from the side wall. Pull the rear shelf support rail away from the side wall and remove it. [. . . ]