User manual AEG-ELECTROLUX EOC69612X

[. . . ] Safety information Product description Before first use Daily use Clock functions Automatic programmes Using the accessories 21 24 24 25 29 30 31 Additional functions Helpful hints and tips Care and cleaning What to do if. Subject to change without notice Before the installation and use, read this manual carefully: · For your personal safety and the safety of your property · Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage. Children and vulnerable people safety · This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. [. . . ] The display shows the time when the appliance starts to cook. Display shows it also after you deactivate the appliance and the cavity is still warm. The display shows that automatic weight system is active or weight can be changed. You can use it to set other oven settings. Set the oven temperatures 20-40 °C lower than when using Conventional. For baking and roasting on one oven level For baking on one oven level dishes that require more intensive browning and a crispy base. Set the oven temperatures 20-40 °C lower than when using conventional. Maximum temperature for th is function is 200°C Economy Grill Dual Grill Bottom Heat Slow cook For grilling flat foodstufs placed in the middle of the grill and for toasting. Application Reminds you when to clean the oven. When ON, the displays shows the current time when you deactivate the appliance. When ON you can choose Set+Go function in the Select Options window. When ON you can choose Heat+Hold function in the Select Options window. Touch OK to move to submenu or accept setting. At every point you can get back to the main . Heat-up indicator When you activate an oven function, the bar on the display comes on. The bar of the indicator moves from right to left until the oven reaches the target temperature. Residual heat indicator When you deactivate the appliance, the display shows the residual heat. You can use the heat to keep the food warm. You can use Duration and End Time at the same time, if the appliance is activated and deactivated automatically later. If you set the time for a clock function, the time starts to count down after 5 seconds. If you use the clock functions Duration and End Time , the heating elements deactivate after 90% of the set time. The appliance uses the residual heat to continue the cooking process until the time ends (3-20 minutes). [. . . ] Pull the shelf runners from the back of the side wall to remove the shelf support rails. Make sure you put the glass panels back in the correct order. First glass panel has a black frame, the second a small dot on a upper right corner and the third one has no marking. The panel with black frame must be assembled with the screen-printing outside of the oven. [. . . ]