User manual AEG-ELECTROLUX EOL5821BAX

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] Press a sensor field to deactivate the signal. With some programmes turn over the food after 30 minutes. 2 Assisted Cooking with Weight Automatic This function automatically calculates the roasting time. To use it, it is necessary to input the food weight. The display shows the core temperature sensor symbol. 1 Core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates. Only use the core temperature sensor supplied with the appliance or genuine replacement parts. Put the tip of the core temperature sensor into the centre of the meat. Put the core temperature sensor plug into the socket on the front of the appliance. Press or in less than 5 seconds to set the core temperature. Set the oven function and, if necessary, the oven temperature. the appliance calculates an approximate end time. The end time is different for different quantities of food, the set oven temperature (minimum 120 °C) and the operating mode. The appliance calculates the end time in approximately 30 minutes. Make sure that the core temperature sensor stays in the meat and in the core temperature sensor socket during the cooking. If necessary, you can set a new core temperature during the cooking. Do this, touch When the meat is at the set core temperature, an acoustic signal sounds. the appliance deactivates automatically. Touch a sensor field to stop the signal. Remove the core temperature sensor plug from the socket . Be careful when you remove the tip and plug of the core temperature sensor. [. . . ] Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact an authorized electrician. Put the plug of core temperature sensor as far as possible into the socket. The display shows “Demo”. [. . . ]