User manual AEG-ELECTROLUX EOV5700AOX

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] When the set time ends, an acoustic signal sounds for two minutes and flash in the display. 00:00 and Touch a sensor field to stop the acoustic signal. 6 Setting the Time delay function The DURATION and END functions can be used at the same time, if the oven is to be activated and deactivated automatically later. In this case, first set the and then the END DURATION function (refer to "Setting the DURATION" and "Setting the END "). When the Time delay function is activated, the display shows a static symbol of the with a dot and . The oven function, dot shows which clock function is on in the Clock / residual heat display. 4 Check result (selected models only) If you set the END or DURATION function, two minutes before the end of cooking an acoustic signal sounds and the lamp activates. The appliance goes to the setting of the END or DURATION function. During these two minutes you can examine the results of the cooking, and, if necessary, add the END or DURATION time. 5 Setting the MINUTE MINDER Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). Use an automatic programme or recipe when you do not have the knowledge or experience on how to prepare a dish. There are two types of automatic programmes: • Automatic recipes • Automatic programmes with weight input 8. The display shows: the cooking time, the duration symbol , a default weight, a unit of measurement (kg, g). Touch or the settings save automatically after five seconds. You can change the default weight value with or . When the set time ends, an acoustic signal sounds for two minutes. Touch a sensor field to stop the acoustic signal. The display shows the number of the automatic programme (P1 – P9). Touch or the automatic recipe activates automatically after five seconds. When the set time ends, an acoustic signal sounds for two minutes. Touch a sensor field to stop the acoustic signal. 3 Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. [. . . ] If the fuse releases again and again, contact a qualified electrician. You want to start the pyrolytic cleaning but you did not fully close the door. €¢ Deactivate the appliance with the house fuse or the safety switch in the fuse box and activate it again. €¢ If the display shows F102 again, contact the Customer Care Department. [. . . ]