User manual AEG-ELECTROLUX EOZ5821AAX

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] €¢ You can activate or deactivate the function in the Basic Settings menu. €¢ Conditions for the function: – The set temperature is more than 80 °C. 1 Assisted Cooking with Recipe Automatic This appliance has a set of recipes you can use. Recipes are fixed and you cannot change them. Com When you use the Manual function, the appliance uses automatic settings. You can change them as with other functions. 2 Assisted Cooking with Weight Automatic This function automatically calculates the roasting time. To use it, it is necessary to input the food weight. When the time ends, an acoustic signal sounds. Press a sensor field to deactivate the signal. With some programmes turn over the food after 30 minutes. 1 Core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates. Only use the core temperature sensor supplied with the appliance or genuine replacement parts. The display shows the core temperature sensor symbol. Put the tip of the core temperature sensor into the centre of the meat. Put the core temperature sensor plug into the socket on the front of the appliance. Press or in less than 5 seconds to set the core temperature. Set the oven function and, if necessary, the oven temperature. the appliance calculates an approximate end time. The end time is different for different quantities of food, the set oven temperature (minimum 120 °C) and the operating mode. The appliance calculates the end time in approximately 30 minutes. [. . . ] If the fuse releases again and again, contact an authorized electrician. Put the plug of core temperature sensor as far as possible into the socket. The display shows “Demo”. The CT Sensor plug is not correctly installed into the socket. [. . . ]