User manual AEG-ELECTROLUX EQT6540BOG

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] The displays, indicators and sounds tell which functions operate. sensor field 1 2 3 4 5 6 7 8 9 function To activate and deactivate the appliance. To show for which of the roasting zones you set the time. To show that the Count Down Timer operates (1 to 99 minutes) or to show that Minute Minder operates. 10 11 12 13 / To increase or decrease the time. To set the roasting zone for the Timer function. 3 step residual heat indicator: continue cooking / keep warm / residual heat. OptiHeat Control indicates the level of the residual heat. The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 5 OptiHeat Control (3 step Residual heat indicator) WARNING!1 On and Off Touch for 1 second to start or stop the appliance. 2 Automatic Switch Off The function deactivates the appliance automatically if: • All roasting zones are deactivated . € You do not set the temperature after you activate the appliance. € You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. The sound operates some time and the appliance deactivates. Remove the object or clean the control panel. € You do not deactivate a roasting zone or change the temperature. After 90 micomes on and the appliance nutes deactivates. Before next use, set the roasting zone to . If you set the temperature, the display flashes until the roasting zone reaches the temperature. Then a signal sounds and the display shows the temperature. [. . . ] 580 mm 520 mm Only use special a heat - resistant silicon. The worktop cut out Distance from the wall : minimum 50 mm Depth : 490 mm Width : sum widths of all the appliances to be built-in and subtract 20 mm (see also "Overview of all appliance widths" ) The installation of more than one appliance 1. Put down the dimension of the worktop cut out and saw it out. + 360 mm - 20 mm = 920 mm 490 mm Put the appliances one at time on some soft surface, a blanket for example, with the bottom side up. [. . . ]