User manual AEG-ELECTROLUX ER1820D

[. . . ] m Make sure that the cable is not trapped underneath the appliance, nor touches the motor. m Repairs carried out by inexperienced persons may cause injuries or serious malfunctioning. m Make sure the rear part of the appliance stands against a wall as there are working parts which heat up and should not be of easy access. m Make sure that there is a continous and adequate ventilation as a failure to do so may result in damage to the appliance or deterioration of the food. [. . . ] 8Unscrew the plastic bolts of the opposite side of the place of the central hinge taken out and introduce them in the holes occupied before fy the hinge. 9Unscrew the axe of the upper hinge and screw it to the hinge on the opposite side. Maker sure to fit in the metal spacer for blocking. Assemble the lower hinge reinforcement in the opposite side it was situated. For the remaining parts proceed the other way round. Once finished make sure that all joints close perfectly well all around the door and chek that the internal light turns of when the fridge door closes. 30 Regulation and Control Temperature regulation: «A» Fig. 4. Allows temperature according to room temperature and usage. Lowest setting, minimum cold: Highest setting, maximum cold: Off 1 6 0 A Interior light: (H) Fig. 4 Comes on when opening the door of the refrigerating compartment and shuts off when you close the door. It also shuts off turning the temperature regulator to 0 position. When changing the light bulb, first remove the protective cover «X» after pull out the screw Y (see point A2, «IF SOMETHING DOES NOT WORK»). Fig. C) If the food has begun to thaw, use them up as quickly as possible, or cook them and refreeze them. 32 Maintenance of your Refrigerator-Freezer Prior to undertaking any maintenance operation, be sure to unplug the appliance. Defrosting of the freezer The inner walls of the freezer become gradually covered with a layer of frost keeping in mind not to open the door frequently and keeping the food wrapped up in closed bags. Whenever the thickness of ice reaches 5 mm. Remove all food staffand place it in the coolest possible place. . 2Pull out the drawers and the upper tray. 3Under no circumstances should you try and tear off the ice formed, wait for it to melt away. 4Once the ice eliminated and the applience is clean and dry, 5Plug in the appliance. 33 Maintenance of your Refrigerator-Freezer Defrosting of the refrigerator Frost is automatically eliminated in the refrigerator. Clean regularly the water drain opening «G». Cleaning Do not use alcohol or any cleanig product containing alcohol because it can damage the cabinet. Use lukewarm water and neutral soap or bicarbonate of soda for cleaning the interior and the exterior of the appliance. Never use detergents nor abrasive powders. Clean the black grill on the read of the appliance (condeser), motor and the upper and downer ventilation slots with a brush or vacuum cleaner. This way the performance of the appliance will improve and energy consumption reduced. [. . . ] The freezer or the refrigerator do not cool enough. The appropiate «Temperature Regulator» is in position «0». Inadequate position of «Temperature Regulator». Food has been introduced recently in large quantities. «Temperature Regulator» on inadequate position. [. . . ]