User manual AEG-ELECTROLUX ER7425D

[. . . ] Frost may be removed by using the scraper provided. Under no circumstances should solid ice be forced off the liner. Solid ice should be allowed to thaw when defrosting the appliance. Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. Installation There are working parts in this product which heat up. [. . . ] Unscrew the two screws which hide the fixing holes of the hinge on the left-hand side. Detach the lower door from the central hinge (H). Remove the central hinge and detach the upper door from the pin (5). Unscrew the pin (5) and screw it into the corresponding position on the opposite side. Remove the two plugs, to reveal the holes for the hinge pivots, and remount them on the other side. Re-assemble the lower hinge (1) and the support foot (2) on the opposite side. Refit it on the opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack. Attention After completion of the door reversibility operation, verify that the door gasket is adherent to the cabinet. If the ambient temperature is cold (i. e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier. PR228 D548 Fig. 6 3 1 2 D715 29 TECHNICAL SPECIFICATION The technical data is indicated in the rating plate on the left side inside the appliance. GB Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by 6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used. 30 OPERATION Starting-up and Temperature Regulation Insert the plug into the wall socket. Open the refrigerator door and turn the thermostat knob, to be found on the upper right side of the inner liner, clockwise, beyond the O position, to start the appliance. Temperature adjustment is obtained by turning the thermostat knob to the required setting. A medium setting is generally the most suitable. However, the thermostat knob setting should be adjusted depending on the temperature required inside the appliance. This, in turn, depends on a number of factors such as the ambient temperature, the number of times the door is opened, the quantity of food stored and the location of the appliance. Turn the knob clockwise, to higher numbers, to obtain a lower temperature, or anticlockwise if a higher temperature is required. GB Storage of foods in refrigerator compartment To achieve the best results with the refrigerator compartment, you should follow some very simple rules: Do not put warm foods or evaporating liquids in the refrigerator; cover or wrap foods (particularly if they have a strong smell or contain aromatic herbs); do not cover the shelves with paper or plastic since this blocks the air circulation in the compartment. Please note: Do not place foodstuffs and paperbags etc. [. . . ] 12 Internal cleaning Never use metal objects for cleaning your appliance as it may get damaged. Clean the inside and accessories of the refrigerating compartment with warm water and sodium bicarbonate (one tablespoon in 4 litres of water). Clean the inside of the freezer compartment after each complete defrosting. External cleaning Wash the outer cabinet with warm soapy water. Once or twice a year dust the condenser (black grill) and compressor at the back of the appliance with a brush or vacuum cleaner. [. . . ]