User manual AEG-ELECTROLUX ER8218C

[. . . ] r e f r i g er a t o r / r é f r i g é r a t e u r / k ü h l g e r ä t e / f r i g o r i f e r o / koelkast / køleskap INSTRUCTION BOOKLET NOTICE D'UTILISATION GEBRAUCHSANWEISUNG ISTRUZIONI D'USO GEBRUIKSAANWIJZING BRUGSANVISNING GB FR DE IT ER8218C, ER8817CX NL DK 818 16 03 -- 01/3 Safety instructions GB Your new fridge may have other functions compared to your previous one. Carefully read these instructions to learn how the appliance works and how to care for it. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety. [. . . ] · Ensure that food placed in the freezer is dated and labelled and used in date order to ensure that food is consumed at its best. Remove suspect food from you refrigerator and clean, refer to cleaning and maintenance. · · · · · · Protect the environment · Hand over the cabinet packaging and discarded fridges and freezers to a recycling station. Contact your local city office or your closest dealer for more information. Cut down on disposable material as much as possible. When cleaning the cabinet, use a mild washing-up detergent. Follow the advice in the section "Saving energy" The door gasket and coolant used in this cabinet will not harm the ozone layer. All parts in the packaging can be recycled. The cabinet has been designed for easy dismantling and subsequent recycling. · · · · · · Food Storage · To obtain the best results from your appliance, neither hot foods nor liquids which may evaporate, Maintenance and Cleaning GB Removing the ventilation grille The ventilation grille can be removed, e. g. Make sure the door is open when removing the ventilation grille. Unsnap the upper edge of the grille by pulling outward/downward. Then pull the grille straight out to completely remove it. Cleaning Clean the cabinet at regular intervals. Don't use detergents, abrasive powders, high perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol when cleaning the product Disconnect the appliance from electricity supply. Clean out the drip channel inside the fridge at regular intervals and ensure that the drip channel is clear at all times. If blocked carefully clear using a piece of flexible curtain wire inserted into the drain outlet to remove the blockage. 6 Electrolux 818 16 03--01/3 Internal Cleaning Clean the inside and accossories with warm water and bicarbonate of soda (5ml to 0, 5 litre water) Rinse and dry thoroughly. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. External Cleaning Wash the outer cabinet with warm soapy water. Remove the ventilation grille (see the section "Removing the ventilation grille") and vacuum-clean under the cabinet. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Defrosting the fridge The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by: · not putting warm foodstuff inside the cabinet. · avoiding frequently opening the door or keeping it open too long. · do not place foodstuffs directly against the cold cooling plate. To Change the Light Bulb The light is switched on automatically when the door is opened. [. . . ] Cabinet is placed at a location whose ambient temperature corresponds to the climate classification*, for which the appliance is designed. * See on the raiting plate on the inside of the appliance. The following table shows which ambient temperature is correct for each climate classifacition. Climate classification SN N ST T for an ambient temperature of +10°C to +32°C +16°C to +32°C +18°C to +38°C +18°C to +43°C a) b) 50mm Check that the drain hose at the rear of the cabinet discharges into the drip tray. If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 240 mm to allow the door to open enough so that the shelves can be removed. [. . . ]