User manual AEG-ELECTROLUX ERES3500X

[. . . ] refrigerator/frigorifico INSTRUCTION BOOKLET INSTRUCCIONES DE USO ISTRUÇÕNES DE USO GB ERES3500, ERES3500X GB ES 818 38 21--00/1 PT Safety instructions Your new fridge may have other functions compared to your previous one. GB Carefully read these instructions to learn how the appliance works and how to care for it. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. [. . . ] Then pull the grille straight out to completely remove it. GB Cleaning Clean the cabinet at regular intervals. Don't use detergents, abrasive powders, high perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol when cleaning the product Internal Cleaning Disconnect the appliance from electricity supply. Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0, 5 litre water) Rinse and dry thoroughly. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. External Cleaning Use water/neutral soap emulsion for cleaning the surface of stainless steel, anti-finger-print coated. Wash the outer cabinet with warm soapy water. Remove the ventilation grille (see the section "Removing the ventilation grille") and vacuum-clean under the cabinet. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Servicing and cleaning the water dispenser. Never use cleaning agents with a grinding or aggressive effect. When necessary, clean the surfaces of the dispenser and the water container that are accessible from the outside, using only a soft cloth and warm water. The dispenser drip bowl can be cleaned with a tepid solution of manual dishwashing agent and water. If the system is not be used for a long period, it is advisable to remove the filter and empty out the water. Turn off the water connection to the refrigerator. 9 When the refrigerator is to be used again, rinse the system through thoroughly by draining off at least three litres (5 pints) of water. Before re-fitting the filter, all its parts must be thoroughly thawed out. If necessary, all systems containing water must be sanitized by ordering the necessary sanitizing kit through Electrolux Service Force Centre (tel: +44 8705 929 929) or through our website www. electrolux. co. uk. Electrolux 8183821-00/1 Service during operation The water filter is replaced as follows: Place a piece of kitchen tissue or a dishcloth in the space under the filter. Remove the filter by turning it clockwise. See the section "When starting the water system for the first time". The water connection does not need to be switched off when changing the filter. Replacement filters can be ordered from Electrolux Service Force Centre. See the section "Service and replacement parts". The gas cylinder is replaced as follows: remove the gas cylinder and move over the adapter to the new cylinder. The replacement gas cylinder is obtained through your local dealer. Defrosting the fridge The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by: · not putting warm foodstuff inside the cabinet. [. . . ] If necessary adjust the feet using the adjustment spanner supplied. · there is good air circulation around the cabinet and that the air channels below and behind the cabinet are not blocked. The ventilation space above the cabinet must be at least 4 cm. The ventilation space can either be a) directly above the cabinet, or b) behind and above the top cupboard. [. . . ]