User manual AEG-ELECTROLUX ERF2500AOW

[. . . ] Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined. The extractor hood has been designed exclusively for domestic use. Do not connect the appliance to the mains until the installation is fully complete. [. . . ] The hood must be regularly cleaned on both the inside and outside (AT LEAST ONCE A MONTH). This must be completed in accordance with the maintenance instructions provided in this manual). Failure to follow the instructions provided in this user guide regarding the cleaning of the hood and filters will lead to the risk of fires. Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks. We will not accept any responsibility for any faults, damage or fires caused to the appliance as a result of the non-observance of the instructions included in this manual. USE The hood serves to aspirate the fumes and vapors resulting from cooking. The attached installation manual indicates the version to be used depending on the model you have, the suction version with external evacuation internal recirculation or filtering with . INSTALLATION The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area, after installation. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area, after installation, apply a double pole switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions. Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled. Pressing the button (while the hood is on) modifies the motor speed: Speed 1: the number “1” appears on the display Speed 2: the number “2” appears on the display Speed 3: the number “3” appears on the display High-speed: the number “4” appears (flashing) on the display The high-speed function is regulated by a timer. The standard time setting is 5’, at the end of which the hood adjusts to speed 2. Press button 2 to deactivate this function before the set time expires; the hood will adjust to speed 1. Display Speed timer button Press button “4” to activate the speed timer; the hood turns off once the set time expires. The timer functions in the following way: • Speed 1 - 20 minutes (the number “1” and a small flashing LED light appear on the display) • Speed 2 - 15 minutes (the number “2” and a small flashing LED light appear on the display) • Speed 3 - 10 minutes (the number “3” and a small flashing LED light appear on the display) • High-speed - 5 minutes (the number “4” and a small flashing LED light appear on the display) Press button 1 or button 4 to turn the hood off while the speed timer is in function; by pressing button 2, the hood returns to the set speed. Grease filter indicator After 80 hours of operation, the number “1” starts flashing on the display. press and hold button 1 or 3 to reset the indicator. Carry out maintenance on the grease filter according to the indications of this manual. Charcoal filter indicator After 320 hours of operation, the number “2” starts flashing on the display. press and hold button 1 or 3 to reset the indicator. Carry out maintenance on the charcoal filter according to the indications of this manual. [. . . ] Når du kontakter serviceavdelingen, må du sørge for å ha følgende data for hånden. Hvis man ikke overholder normene for rengjøring av ventilatoren og utskiftning og rengjøring av filtrene, vil dette medføre risiko for brann. Ventilatoren må alltid ha korrekt monterte lyspærer, både under bruk og i stand by, for å unngå risikoen for elektrisk støt. Sørg for at have følgende data tilgængelig, når du kontakter service. [. . . ]