User manual AEG-ELECTROLUX ERN23800

[. . . ] refrigerator INSTRUCTION BOOKLET ERN23800 2222781-90 EN It is very important that you keep this instruction booklet together with the appliance for future reference. If the appliance should be sold or transferred to others, make sure that the instruction booklet is included with it so that the new owner can become acquainted with its operation and the information concerning it. If this appliance - fitted with a magnetic lock - is to replace one fitted with a spring lock, we recommend that you make the spring lock unserviceable before setting the old appliance aside. The purpose of this operation is to prevent children from becoming accidentally locked inside the refrigerator, thus endangering their lives. [. . . ] . 7 Operation anomalies - Technical specifications - Installation - Position . . 8 Electrical connection - Reversibility of the doors . . 10 Installation - Built-in unit instructions . . 14 Cleaning Once the appliance is installed, clean it thoroughly with warm water and soap in order to remove the characteristic "new" odour. Do not use abrasive products, abrasive powders or steel wool. Control panel A - ON/OFF button of the appliance B - Temperature and function indicator C - Function D - Refrigerator thermostat 4 DISPLAY 1. Positive or negative temperature indicator 2. If on, it indicates that the shopping function is active. If the LCD display does not turn on after having plugged the appliance in, press the appliance ON button (A). Activating the functions Operation The following functions will be activated clockwise every time button C is pressed: Symbol 3: shopping function. No symbol: normal operation To switch off the appliance, press button (A) for longer than 1 second. A signal indicates the As soon as the appliance has turned on, the fol- countdown of the temperature: 3-2-1. lowing information will be displayed on the con- When the appliance switches off, the display (B) trol panel: switches off in turn. · The symbol (1) will be positive, indicating that the temperature is positive. By setting the refrigerator grip handle (D) on the intermediate position, the appliance will be ready to provide the following temperature: Switching off the appliance about +5°C inside the refrigerator. Using the refrigerator compartment Temperature adjustment The temperature is automatically adjusted and can be increased (less cold) or decreased (colder) with of the grip handle (D) rotation. In any case, the exact position is to be found considering that the internal temperature depends on the following factors: · ambient temperature; · how frequent the doors are opened; · amount of preserved foods; · position of the appliance. It is advisable to set the grip handle in the intermediate position in order to get an internal temperature of about +5°C Important If the thermostat is set on the maximum cold position, it is possible that the compressor works continuously when the ambient temperature is high and the appliance is full. In this case the risk of too much frost forming on the rear internal wall of the appliance arises. To prevent this problem, set the thermostat on a lower position so automatic defrosting can be performed with consequent energy savings. 5 The Shopping function is activated by pressing button C (several times, if necessary) until the corresponding symbol appears on the display. The Shopping function turns off automatically after about 6 hours. The function can be deactivated at any time. To turn it off, just press button C (see paragraph "Activating the functions"). In the case a large amount of warm foods have to be put in the refrigerator - after shopping, for example - it is advisable to activate the Shopping function in order to cool them more quickly and to prevent the temperature of the other foods inside the refrigerator from rising. Shopping Function Refrigeration To get top efficiency of the refrigerator compartment: · do not put foods that are still warm or evaporating liquids inside it; · cover the foods, especially if they are aromatic; · arrange the foods so that the air can circulate freely. Movable shelves The runners on the internal walls of the refrigerator allow you to position the shelves at different height, as may be required. To optimise space, the front half-shelves can be put on top of the rear ones. The position of the door shelves can be altered. To do so, follow these directions: Detach the shelves by moving them in the direction shown by the arrows. [. . . ] The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BS1362 fuse. Important Only ASTA or BSI approved fuses should be The wires in the mains lead are coloured in used. accordance with the following code: The plug must not be used if the fuse cover/carrier is lost. [. . . ]