User manual AEG-ELECTROLUX ESB 4400

[. . . ] € Always place the appliance on a flat, level surface. € Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning. € Never touch the blades or inserts with your hand or any tools while the appliance is plugged in. [. . . ] The blender jug can become very warm – take care to protect your hands and to ventilate steam out through the filler hole. Start the blender by turning the speed selector to the right. Start at low speed, then progress to a higher speed if required. To use the PULSE function, turn the speed selector to PULSE position and press the PULSE button. If the blended ingredients are soft, the blender engine may lower its speed to optimize power consumption. Ice crushing: press the PULSE button for 3-5 seconds several times until you obtain a satisfactory result. You can add more ice through the filler hole while the blender is running. Quick cleaning: Pour warm water into the jug, add a few drops of detergent. mix water and detergent by pushing the PULSE button briefly. Finally, rinse the jug under running water. Thorough cleaning: Turn the blender off and unplug the power cord. Wipe the motor housing with a damp cloth. Never immerse the motor housing in water or clean it under running water!Turn the blade assembly counter-clockwise and remove it by using the measuring cup. Handle carefully, the blades are very sharp!The lid and measuring cup can be washed in the dishwasher. Fill the mini chopper* with adequate ingredients. Place the blade assembly on top and lock into position. [. . . ] The plastic components are identified by markings, e. Please dispose the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance on the product or The symbol on its packaging indicates that this product may not be treated as household waste. [. . . ]