User manual AEG-ELECTROLUX ESE5688SA-RMY

[. . . ] 4 ADJUSTING AIR FLOW DIRECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 HOW THE AIR CONDITIONER WORKS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 OPTIMAL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 2 Push the button until the AUTO indicator is lit, the unit will work in forced AUTO mode (the default setting temperature is 24 ). 3 Close the panel firmly to its original position. 1 Manual control button AUTO/COOL CAUTION: Once you push the manual button, the operation mode is shifted in an order as: AUTO, COOL, OFF. Push the manual button until the OPERATION indicator flashes rapidly (five times per second), the unit now is operating in forced COOL mode. This is used for testing purposes only, . When the OPERATION indicator goes off, the air conditioner is OFF. To restore the remote controller operation, use the remote controller directly. 4 ADJUSTING AIR FLOW DIRECTION Adjust the air flow direction properly otherwise, it might cause discomfort or cause uneven room temperatures. Adjust the horizontal louver using the remote controller. Adjusting the Vertical Air Flow Direction (up - down) The air conditioner automatically adjusts the vertical air flow direction in accordance with the operating mode. To set the vertical air flow direction Perform this function while the unit is in operation. Keep pressing the AIR DIRECTION button on the remote controller to move the louver to the desired direction. Adjust the vertical air flow direction to the desired direction. The room temperature is thus regulated between the operation suppression zone and the set temperature. (It depends on the outdoor temperature. ) Cooling Fan only Cooling Fan only Cooling Room temperature Time set temperature DRYING operation DRYING OPERATION The dry mode will automatically select the drying operation based on the difference between the set temperature and the actual room temperature. The temperature is regulated while dehumidifying by repeating turning on and off of the cooling operation or fan only. The fan speed indicator will display AUTO and low speed will be used. OPTIMAL OPERATION To achieve optimal performance, please note the following: Adjust the air flow direction correctly so that it is not directed on people. Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature levels. Close doors and windows on COOL or HEAT modes, or performance may be reduced. Use TIMER ON button on the remote controller to select a time you want to start your air conditioner. Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be reduced and the air conditioner may stop running. Remove the batteries from the remote controller. (3) The outdoor unit requires periodic maintenance and cleaning. Contact your dealer or servicer. Checks before operation Check that the wiring is not broken off or disconnected. [. . . ] Adjust the horizontal louver to the maximum air outlet position and select HIGH fan speed. Heating mode (For cooling and heating models only) The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during heating operation. When the outdoor temperature falls, heat drawn in by the air conditioner decreases accordingly. At the same time, heat loading of the air conditioner increases due to larger difference between indoor and outdoor temperature. [. . . ]