User manual AEG-ELECTROLUX ESF4110

[. . . ] Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. Correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. · Do not put any solvents in the dishwasher. · Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. [. . . ] The start of the programme or the countdown of the delay start 14 electrolux will occur only after the closure of the door. Until then it is possible to modify the settings 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Select a washing programme (see 'Washing programmes' chart). When a programme has been selected the corresponding light comes on. Close the appliance door, the programme starts automatically. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start appear in the digital display. ­ The delay start indicator light comes on. Close the appliance door, the countdown starts automatically. The number in the display is no longer flashing but fixed with static light. If the save energy function is set, dishes can be wet at the end of the programme. We recommend to leave the appliance door ajar so that dishes can dry naturally. Standby mode If you do not switch off the appliance at the end of the washing programme, the appliance automatically goes into standby mode. The standby mode decreases energy consumption. Three minutes after the end of the programme, all indicator lights go off and the digital display shows one horizontal bar. Press one of the buttons (not the on/off button), to go back to end-of-programme mode. electrolux 15 Unloading the dishwasher · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. · Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. · Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. Washing programmes Washing programmes Programme Auto 2) Degree of soil Any Type of load Crockery, cutlery, pots and pans Programme description Prewash Main wash up to 45°C or 70°C 1 or 2 intermediate rinses Final rinse Drying Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Main wash up to 60°C Final rinse Prewash Main wash up to 50°C 1 intermediate rinse Final rinse Drying Main wash up to 55°C 1 intermediate rinse Final rinse Energy save 1) Selectable, impact on washing programme. Intensive Heavy soil Crockery, cutlery, pots and pans Selectable, impact on washing programme. Quick 3) Normal or light soil Normal soil Crockery and cutlery Crockery and cutlery Selectable, no impact on washing programme. Selectable, impact on washing programme. Eco 4) One hour Light soil Crockery and cutlery Selectable, no impact on washing programme. [. . . ] Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. To avoid water leakage after installation make sure that the water couplings are tight. max 85 cm max 400 cm min 40 cm The drain hose can face either to the right or left of the dishwasher Ensure the drain hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. [. . . ]