User manual AEG-ELECTROLUX ESF4120

[. . . ] Lavavajillas Dishwasher Máquina de lavar loiça Model ESF 4120 E GB P Manual de instrucciones Instruction book Instruções de utilização Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Protection against flooding Hints for test centres Technical specifications 26 27 28 29 29 32 33 33 34 35 36 37 38 40 40 40 41 41 41 41 42 43 43 44 44 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Fitting under a counter Levelling 45 45 46 46 47 47 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 25 Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). The start of the programme will occur after about 6 seconds from the last pressure of a programme push button, in this time it is possible to change programme simply pressing the push button of another programme. Once the programme has started the phase indicator lights will turn off except for the phase under way. It is possible to interrupt the programme: q 2. Press the On/Off push button The On/Off indicator light will come on. opening the door pressing the On/Off (in this case all the indicator lights turn off) 3. Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necessary. q Close the door again o press the On/Off, the programme will start from the point in which it was interrupted. 4. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Slide the baskets back into the machine. 8b. Setting and starting the programme with delay start The setting of the delay start occurs before selecting the programme. Press the delay start push button and selected the desired time (3, 6 or 9 hours) until the indicator light corresponding to the chosen hours flashes. Press the push button corresponding to the required programme: the indicator light corresponding to the programme illuminates and the phase indicator lights for that programme start flashing. The start of the countdown will occur after about 6 seconds from the last pressure of a programme push button. The countdown will decrease with step of 3 hours and you are informed of this by the indicator lights of the hours. During the countdown the only indicator lights illuminated are the programme light and the light of the number of hours to the start of the programme. Once the delayed time has elapsed the programme will start automatically. 5. Ensure that the spray arms can rotate freely. Measure out detergent Add the required amount of detergent into the dispenser according to the recommended quantity given in the Washing programmes chart. Close the detergent dispenser lid. 7. Setting and starting the programme without delay start Press the push button corresponding to the wanted programme: the indicator light corresponding to the programme illuminates and the phase indicator lights foreseen for that programme start flashing. 38 It is possible to stop a countdown in progress or before it starts, simply pressing the delay start push button until the indicator lights of the hours are off. 9. To cancel a programme in progress A programme in progress can be cancelled at any time. [. . . ] To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. [. . . ]