User manual AEG-ELECTROLUX ESF4127

[. . . ] We promise that it will provide a superior User Experience delivering Ease-of-Mind. Good luck! 117984 11/0 4 electrolux contents Contents Safety information Product description Control panel First use Daily use Washing programmes Care and cleaning Something not working Technical data Hints for test institutes Installation Environment concerns 5 7 8 11 15 24 25 27 30 32 33 38 The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information safety information electrolux 5 Safety information q In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] In this case the rinse aid indicator light will always remain illuminated when the machine is switched on. Select the lowest setting for water hardness and rinse aid dosage. Before the start of the washing programme put the combi detergent tablet in the detergent dispenser. If the drying results are not satisfactory we recommend that you: 1. Fill up the rinse aid dispenser with rinse aid. Set the rinse aid dosage to position 2. If you decide to turn back to the use of the standard detergent system we advise that you: 1. Fill up the dispensers for salt and rinse aid again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. 22 electrolux daily use Select and start a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2. Turn the programme knob until the programme marker corresponds with the desired programme (see "Washing programmes" chart). The running programme has been cancelled and it is now possible to set a new washing programme or switch off the machine. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. 2. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Unloading the dishwasher Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. q Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. q Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. q When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 24 electrolux washing programmes Washing programmes Programme Intensive 70° A Heavy soil Degree of soil Type of load Programme description Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Prewash Main wash up to 65°C 2 intermediate rinses Final rinse Drying Main wash up to 60°C Final rinse Crockery, cutlery, pots and pans Normal 65° B Normal soil Crockery and cutlery Quick 60° C Light soil Crockery and cutlery Eco 50° D Normal soil Crockery and cutlery Prewash Main wash up to 50°C 1 intermediate rinse Final rinse Drying 1 cold rinse (to avoid food scraps from sticking together). This programme does not require the use of detergent. Rinse and Hold E Any. Partial load (to be completed later in the day). care and cleaning electrolux 25 Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). [. . . ] To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. To a stand pipe provided with venthole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. [. . . ]