User manual AEG-ELECTROLUX ESF6122

[. . . ] Dishwasher Model ESF 6122 en Instruction book Contents Description of the appliance Safety instructions Disposal Economical and ecological dishwashing The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and spare parts 2 3 3 3 4 5 5 6 6 8 8 8 9 9 9 10 11 12 14 14 14 14 14 15 16 Installation instructions Fitting under a counter Levelling Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Hints for test centres Technical specifications 17 17 17 17 17 18 18 19 19 Description of the appliance 1. Upper basket stop Water hardness switch Salt container Detergent dispenser (type A / type B) Control panel Rating plate Rinse aid dispenser (type A / type B) Filters Lower spray arm 10. Worktop IN148 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. [. . . ] If you decide to turn back to the use of the standard detergent system we advise that you: DE17 DE02 q Refill both the salt container and rinse aid dispenser. Switch the water hardness setting to the highest possible position and run a normal washing programme without a load. Readjust the water hardness setting again according to the hardness of the water in your area. 4. All programmes with prewash need a little amount of detergent (5 g) to be added over the lid of the dispenser. q q 10 Washing programmes Programme Degree of soil and type of load Cycle description (3) Consumption values Programme duration (in minutes) Energy consumption (in kWh) Water consumption (in litres) 70° Heavy soil. Crockery, cutlery, pots and pans Warm prewash Main wash up to 70°C 2 warm rinses 1 hot rinse Drying Cold prewash Main wash up to 65° 1 cold rinse 1 hot rinse Drying Main wash up to 60°C 1 hot rinse Cold prewash Main wash up to 50°C 1 warm rinse 1 hot rinse Drying 80 - 90 1, 65 - 1, 85 22 - 24 Normal soil. Crockery and cutlery 65° 95 - 105 1, 25 - 1, 45 19 - 21 60° (1) Fresh soil. Crockery and cutlery 30 0, 8 9 50° (2) Normal soil. Crockery and cutlery 155 - 165 0, 95 - 1, 05 13 - 15 (1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hints for Test Centres). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of the programme has been extended. (3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. 11 Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Press the On/Off push button The On/Off indicator light illuminates. q 7. Setting the "delay start" The setting of the delay start occurs before selecting the programme. Setting the "delay start" q q 5. Setting and starting the programme Press the push button of the programme you wish to select. (See "Washing programmes" chart for the number of the programme). The corresponding indicator light illuminates and the indicator lights of the phases foreseen for the programme will illuminate. The start of the programme will occur automatically about 3 seconds after the last pressure of a push button. Once the programme has started the phase indicator lights will turn off except for the phase under way. Press the On/Off push button. Press the "delay start" push button until the indicator light corresponding to the chosen hours flashes (3, 6 or 9 hours). [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. [. . . ]