User manual AEG-ELECTROLUX ESF6281S

[. . . ] D i s h w a s h e r User information ESF 6281 822 612 384-00-140905-03 g Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appliance. The following symbols are used in the text: 1 Safety instructions 3 Useful tips and hints 2 Environmental information Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance. 2 Contents Operating Instructions . Switching on for the first time ­ setting the language. [. . . ] 30 minute programme). 25 Starting a dishwashing cycle 1. Check that the spray arms can turn freely. Using the Program button, select the desired programme. The name of the dishwashing cycle that is currently selected flashes. To the right of the name the estimated duration of the cycle is displayed. The selected dishwashing cycle will begin. In the text line of the display you will see the name of the current programme stage. Next to this you will see the estimated remaining duration in minutes. Using the Options button you can briefly display the name of the dishwashing cycle in the display. Interrupting or aborting a dishwashing cycle Only interrupt a dishwashing cycle that is in progress if it is absolutely necessary. Interrupting the dishwashing programme by opening the dishwasher door opened. There is a risk of scalding. 1 Hot steam may escape when the door is 1. Open the door carefully. The dishwashing cycle will stop, in the display: PLEASE CLOSE DOOR 2. Close the door. The cycle will continue. Aborting the dishwashing cycle 1. Press the Cancel button. In the display: CHOOSE PROGRAMME 3. If you want to start a new dishwashing cycle, check whether there is any detergent in the dispenser. 3 A dishwashing cycle can only be started from the Programmes menu. 3 During the dishwashing cycle, the remaining 3 Turning off the dishwasher will only interrupt a time shown in the display may be adjusted acselected dishwashing cycle, not cancel it. The cording to the size of the load, degree of soiling, etc. cycle will recommence after turning the dishwasher back on again. If the dishwashing cycle does not start: If after pressing the Ok/Start button, the programme does not start and a message appears in the display (REFILL RINSE AID, REFILL SALT or PLEASE CLOSE DOOR): · Follow the instructions in the message. After the problem has been remedied, the cycle starts automatically. Setting the Delay Timer 3 With the delay timer you can delay theand 19 start of a dishwashing cycle for between 1 hours. First set the Delay Start and then the desired dishwashing cycle. 1. Press the Delay Start button repeatedly until the desired period by which you want to delay the start is displayed in the display. lights up in the symbol line of the display. First the pre-set time delay counts down. In the display you will see START IN and the time remaining until the start of the dishwashing cycle. [. . . ] Connecting the drain hose: ­ Maximum permitted height: 1 metre. ­ Minimum required height: 40 cm above the bottom edge of the appliance. 1 The drain hose must not be kinked, crushed or Extension hoses · Extension hoses are available from your dealer or from our Customer Care Department. To ensure that the function of the appliance is not impeded, the internal diameter of extension hoses must be 19 mm. · Extension hoses must not be laid more than a maximum distance of 4 metres horizontally; the maximum permitted height for the connection for the drain hose is then 85 cm. Sink outlet connection · The outlet of the drain hose (ø 19 mm) fits all commonly available sink outlet types. [. . . ]