User manual AEG-ELECTROLUX ESF 65050

[. . . ] user manual Dishwasher ESF65050 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com CONTENTS Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 2 3 4 5 5 6 7 8 10 11 Select and start a washing programme 12 Washing programmes 13 Care and cleaning 14 What to do if. . . 15 Technical data 17 Installation 17 Water connection 18 Electrical connection 19 Environment concerns 19 Subject to change without notice SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. [. . . ] The multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated. The programme duration can increase if you use the multitab function. Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. Cancel the washing programme, then set the programme again. 12 electrolux To activate the multitab function: · Press the multitab button. To deactivate the multitab function: · Press the multitab button. Do these steps if the drying results are not satisfactory: 1. Fill the rinse aid dispenser with rinse aid. · You can only activate or deactivate the rinse aid dispenser when the multitab function is activated. To activate/deactivate the rinse aid dispenser: The appliance must be switched off. Turn the programme knob counterclockwise until the programme marker agrees with the second washing programme on the control panel. 2. The digital display shows the current setting for the rinse aid dispenser. Rinse aid dispenser deactivated Rinse aid dispenser activated 3. Press the start/cancel button to change the setting. The digital display shows the new setting. Turn the programme knob to the off position to save the operation. Fill the salt container and rinse aid dispenser. Adjust the water hardness setting to the highest level. Adjust the water softener to the water hardness in your area. Adjust the rinse aid dosage. SELECT AND START A WASHING PROGRAMME Do these steps to set and start a washing programme: 1. Turn the programme knob to set the washing programme. Refer to the chapter 'Washing programmes'. [. . . ] A drain hose extension must not be longer than 2 m. The internal diameter must not be smaller than the diameter of the hose. If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot The appliance has a security feature to prevent that dirty water goes back into the appliance. [. . . ]