User manual AEG-ELECTROLUX ESF65053W

[. . . ] user manual Dishwasher ESF65053 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 2 3 4 5 5 6 7 8 10 11 Select and start a washing programme Washing programmes Care and cleaning What to do if. . . Technical data Installation Water connection Electrical connection Environment concerns 11 13 13 15 16 16 17 19 19 Subject to change without notice Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. [. . . ] The multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated. The programme duration can increase if you use the multitab function. Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. Cancel the washing programme, then set the programme again. To activate the multitab function: · Press the multitab button. To deactivate the multitab function: · Press the multitab button. Do these steps if the drying results are not satisfactory: 1. Fill the rinse aid dispenser with rinse aid. · You can only activate or deactivate the rinse aid dispenser when the multitab function is activated. To activate/deactivate the rinse aid dispenser: The appliance must be switched off. Turn the programme knob counterclockwise until the programme marker agrees with the first washing programme on the control panel. Release the start/cancel button when the display shows the water hardness level. Turn the programme knob counterclockwise until the programme marker agrees with the second washing programme on the control panel. The digital display shows the current setting for the rinse aid dispenser. Rinse aid dispenser deactivated Rinse aid dispenser activated 5. Press the start/cancel button to change the setting. The digital display shows the new setting. Turn the programme knob to the off position to save the operation. Fill the salt container and rinse aid dispenser. Adjust the water hardness setting to the highest level. Adjust the water softener to the water hardness in your area. [. . . ] If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot Water drain hose 1. Connect the water drain hose to the sink spigot and attach it under the work surface. This prevents that the waste water from the sink goes back into the appliance. The appliance has a security feature to prevent that dirty water goes back into the appliance. [. . . ]