User manual AEG-ELECTROLUX ESF6550

[. . . ] Dishwasher Model ESF 6550 Instruction book Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time The water softener Filling with dishwasher salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine 3 3 3 4 5 6 6 7 7 8 8 8 9 9 9 10 10 11 12 13 13 13 13 13 Something not working Service and spare parts Installation instructions Levelling Fixing to adjacent units Water supply connections Water outlet hose connection Electrical connection Building-in Hints for test centres 14 15 16 16 16 16 26 17 18 19 Technical specifications Dimensions Width Height Max depth Max depth with open door 59. 6 cm 81. 8 - 87. 8 cm 61 cm 118. 5 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (3) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended. (4) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. Note: Intensive 70°C and Automatic programmes are foreseen with Care Plus function, which gives a greater degree of hygiene to dishes and glasses. In the last rinse the temperature will be held at over 65°C for at least 10/11 minutes. 11 Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Press the On/Off button The On/Off indicator light illuminates. Cancel a washing programme in progress To cancel a washing programme in progress, press simultaneously function buttons 2 and 3 until all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. 7. Cancelling the "delay start" in progress It is possible to cancel a countdown in progress or before it starts, simply pressing the delay start button until the indicator lights corresponding to the delay start hours (3h, 6h or 9h) turn off. In this case the selected washing programme will start automatically after about 3 seconds. 5. Setting and starting the programme Press the button corresponding to the required programme (see "Washing programmes" chart). The indicator light corresponding to the programme and the phase indicator lights foreseen for that programme will start blinking. After about 3 seconds from the last pressure of a button the programme starts automatically. Once the programme has started the phase indicator lights will turn off except for the phase under way. 8 . End of the washing programme The dishwasher will automatically stop and the end of programme indicator light will illuminate. The indicator light of the programme just ended will remain on. Switch off the dishwasher by pressing the On/Off button, the On/Off indicator light turns off. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Setting and starting the programme with "delay start" Set the delay start before selecting a washing programme. Press the delay start button until the indicator light corresponding to the chosen hours flashes (3h, 6h or 9h) Press the button corresponding to the required programme (see "Washing programmes" chart). After about 3 seconds from the last pressure of a button the countdown starts automatically. [. . . ] In case that the electrical cable has to be replaced, please contact your local Service Force Centre. The appliance should not be connected to the electrical supply by means of an extension cable. Safety standards require the appliance to be earthed. The manufacturer accepts no liability for failure to observe the above safety precautions. 17 Building-in This dishwasher is designed to be fitted either under a kitchen counter or a worksurface. [. . . ]