User manual AEG-ELECTROLUX ESF6560RGW

[. . . ] Only use the appliance to clean household utensils that are applicable for dishwashers. Put the knives and all items with sharp points in the cutlery basket with their points down. If not, put in a horizontal position in the upper basket. If you open the door while the appliance is in operation, hot steam can escape. [. . . ] Make sure that the spray arms can move freely before you start a washing programme. Always close the door after you load or unload the appliance. Lower basket Put saucepans, lids, plates, salad bowls and cutlery in the lower basket. Arrange service dishes and large lids around the edge of the basket. Mix spoons with other cutlery to prevent them to bond together. Lower the handle of the cutlery basket to put the cutlery in the basket. The rows of prongs in the lower basket can be flat to load pots, pans and bowls. If the dimensions of the cutlery prevent use of the cutlery grids, you can easily hide them. Put forks and spoons with the handles down. You can use these parts separately for more loading flexibility. To disassemble the parts, move them horizontally in opposite directions and pull them apart. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing programmes when you use detergent tablets to fully remove the detergent. Some types of tablets can contain other agents. Do a check if these tablets are applicable for the local water hardness. refer to the instructions from the manufacturer. When you set the multitab function, it stays on until you deactivate it. the multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated. The programme duration can increase if you use the multitab function. activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. [. . . ] If the hot water comes from alternative sources of energy that are more environmentally friendly (e. Solar or photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption. Do not use connection hoses from an old appliance. the water pressure must be in the limits (refer to the chapter 'Technical data'). [. . . ]