User manual AEG-ELECTROLUX ESF6630ROW

[. . . ] 4 First use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Set the water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Use of dishwasher salt . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Use of rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc. . . ). Check whether these detergents are suitable for your water hardness. Once this function is selected it will remain active for all following wash programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. When using the "Multitab function", the cycle durations may change. Activate/deactivate the ''Multitab function'' before the start of a washing programme. Once the programme is running, the "Multitab function " can NO longer be changed. If you want to cancel the "Multitab function " you have to cancel the programme setting and then deactivate the ''Multitab function''. In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Simultaneously press and hold the two Multitab buttons (function buttons D and E) until the Multitab indicator light comes on. To deactivate the function press the same buttons again until the indicator light corresponding to the Multitab function symbol goes off. electrolux 13 If the drying results are not satisfactory we suggest that you: 1. The digital display shows only 1 horizontal bar and will remain on for all the duration of the washing programme. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the digital display shows the flashing number of hours for the delay start. The start of the selected washing programme can be delayed for between 1 and 9 hours. Close the dishwasher door, the countdown starts automatically. The number in the display is no longer flashing but fixed with static light. The countdown will decrease in steps of 1 hour. Opening the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. Once the delay start has elapsed the programme will start automatically. 14 electrolux With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light will come on. [. . . ] When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot Water drain connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. [. . . ]