User manual AEG-ELECTROLUX ESI6515LOX

[. . . ] U dient het juiste programma in te stellen en te starten voor het type lading en de mate van vervuiling. €¢ Het programma van toepassing is op het type lading en de mate van bevuiling. You’ve chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. [. . . ] Processing residues can stay in the appliance. Do not use detergent and do not load the baskets. If you use the combi detergent tablets, activate the Multitab option. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Press the on/off button to activate the appliance. Press and hold, at the same time, Program and Option for a few seconds. Press and hold, at the same time, Delay and Start until the programme in, and dicators start to flash. Five intermittent acoustic signals = level 5. €¢ The display shows the current setting of the water softener. Press Program again and again to change the setting. Press the on/off button to deactivate the appliance and to confirm the setting. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. Water and salt can come out from the salt container when you fill it. To prevent it, after you fill the salt container, start a programme. C Press the release button (D) to open the lid (C). Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. [. . . ] After the checks are completed, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If the display shows other alarm codes, contact the Service. [. . . ]