User manual AEG-ELECTROLUX ESIER09PGGMB

[. . . ] INVERTER SPLIT - TYPE (R410A) Contact an authorised service technician for repair or maintenance of this unit. Contact the installer for installation of this unit. The air conditioner is not intended for use by young children or infirmed persons without supervision. Young children should be supervised to ensure that they do not play with the air conditioner. [. . . ] When the air conditioner is started immediately after it was stopped, the horizontal louvre might not move for approximately 10 seconds. Open angle of the horizontal louvre should not be set too small, as COOLING or HEATING performance may be impaired due to too restricted air flow area. Do not operate unit with horizontal louvre in closed position. When the air conditioner is connected to power (initial power), the horizontal louvre may generate a sound for 10 seconds, this is a normal operation. 13 PARTS IDENTIFICATION Indoor unit 3 2 1 10 Indoor unit 1. Manual control button 8 4 5 67 AUT O COO DRY L HEA T FAN HIGH MED LOW TEM MOD E ON/O SWIN G ECO RESE T LOCK P 9 FF FAN NON Outdoor unit 11. Connecting pipe cable and drain hose 12. Air outlet The operation indicator lights flash rapidly (five times per second) when safety protection features come into operation. Note: All the pictures in this manual are for explanation purpose only. They may be slightly different from the air conditioner you purchased (depends on model). The actual shape shall prevail. Y TIME R R AIR DIRE CTIO N CAN CEL DIGI TAL DISP LAY Outdoor unit 12 11 13 FUNCTION INDICATORS ON INDOOR UNIT DISPLAY PANEL 4 1 2 3 4 5 6 1 AUTO indicator This indicator illuminates when the air conditioner is in AUTO operation. 2 TIMER indicator This indicator illuminates when TIMER is set ON/OFF. Indicator This indicator illuminates when the air conditioner starts defrosting automatically or when the warm air control feature is activated in heating operation. TEMPERATURE indicator A) Displays the temperature settings when illuminate. When changing the setting temperature, this indicator begins to flash, and stops 20 seconds later. B) Displays the room temperature when the air conditioner is in FAN only operation. C) When the unit stops operation, it return to original factory settings. D) Displays the malfunction code or protection code. 5 OPERATION indicator This indicator flashes after power is on and illuminates when the unit is in operation. 6 FREQUENCY indicator This indicator appears only when the compressor is in operation and indicates the current operating frequency. The more indicators that are visible the higher the operating frequency. 14 Manual operation Manul operation can be used temporarily in case you can't find the remote controller or its batteries are exhausted. 1 2 Panel 3 Open and lift the front panel up to an angle until it remains fixed with a clicking sound. One press of the manual control button will lead to the forced AUTO operation. Close the panel firmly to its original position. Manual control button AUTO/COOL CAUTION: Once you push the manual button, the operation mode is shifted in an order as: AUTO, COOL, OFF. Push the button twice, the unit will operate in forced COOL mode. [. . . ] If a comfortable temperature can't be achieved by the air conditioner, we suggest you use a supplementary heating device. Auto-restart function Power failure during operation will stop the unit completely. For the unit without Auto-restart feature, when the power restores, the OPERATION indicator on the indoor unit starts flashing. To restart the operation, push the ON/OFF button on the remote controller. [. . . ]