User manual AEG-ELECTROLUX ESL4135

[. . . ] Dishwasher Model ESL 4135 UK Instruction book 0 01/03 Contents Safety instructions Disposal Economical end ecological dishwashing Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and Spare Parts Customer Care Department Guarantee Conditions 3 3 3 4 4 5 5 6 6 7 7 7 8 8 8 9 10 11 12 12 12 12 12 13 15 15 15 Installation instructions Building-in Levelling Fixing to the adjacent units Water supply connections Water outlet hose connection Electrical connection Hints for test centres 16 16 16 16 16 16 17 18 Technical specifications Dimensions Width Height Max depth 44. 6 cm 81. 8 - 87. 8 cm 55. 5 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door on the right. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 9 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. [. . . ] Partial load (to be completed later in the day). Crockery, cutlery, pots and pans Press the programme button Cycle description (3) Consumption values Programme duration (in minutes) Energy consumption (in kWh) Water consumption (in litres) Rinse and Hold 1 cold rinse (to avoid food scraps from sticking together) Hot prewash Main wash up to 70°C 2 cold rinses 1 hot rinse Drying Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse Drying Main wash up to 50°C 1 cold rinse 1 hot rinse 10 0, 1 12 Intensive 70° 78 1, 6 22 Normal 65° Normal soil. Crockery and cutlery 68 1, 3 18 (1) Bio 50° Normal soil. Crockery and cutlery 68 1, 1 18 (2) Quick 50° Light soil. Crockery and cutlery 38 0, 9 16 (1) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. (2) This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly. (3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. 10 Starting a washing programme In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. Hot steam may escape from the appliance when opening the door immediately after the end of the programme, therefore, open the door carefully. Switch off the dishwasher by pressing the On/Off push button. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Press the On/Off push button The On/Off indicator light comes on. Unloading the dishwasher Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Leave the dishes in the dishwasher for approx. 15 minutes, with the door ajar, after the end of programme so that they dry better and will be cooler. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 4. Setting and starting the programme Press the push button corresponding to the required programme (see "Washing programmes" chart). The corresponding indicator light will flash. If you want to change the programme, simply press the push button of a another programme. Close the dishwasher door, the programme will start automatically. [. . . ] The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation. The water inlet hose must not be kinked, crushed, or entangled when it is being connected up. Do not use, for connection, old hoses which have been used in another appliance. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. 16 EElectrical connection This appliance must be earthed. [. . . ]