User manual AEG-ELECTROLUX ESL4143

[. . . ] USE & CARE MANUAL ESL 4143 Contents Safety Instructions Disposal Economical and Ecological Dishwashing Description of the Appliance Technical specifications The Control Panel Audible signals Prior to Using for the First Time The water softener Filling with dishwasher salt Rinse aid In Daily Use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different Kinds of Detergent Washing Programmes Starting a Washing Programme Maintenance and Cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine Help and Problem Solving Guide Service and spare parts Installation Instructions Building-in Levelling Fixing to the adjacent units Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Electrolux Warranty Hints for Test Centres 3 3 3 4 4 5 5 6 6 7 7 8 8 8 8 9 9 9 10 11 12 13 13 13 13 13 14 15 16 16 16 16 16 16 17 17 18 19 2 Safety Instructions It is most important that this manual should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the manual is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance. Installation q q q q q q Check your dishwasher for any transport damage. [. . . ] This programme is recommended to wash a normally soiled load of 9 place settings. (2) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. Note: Anti+Bac function gives a greater degree of hygiene to dishes and glasses. In the last rinse the temperature will be held at over 65°C for at least 10/11 minutes. 11 Starting a Washing Programme In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. Cancel a washing programme in progress Open the dishwasher door. Press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the button corresponding to the running programme starts flashing. After about 2 seconds the indicator lights of all the programme buttons will illuminate indicating that the running programme has been cancelled and that the machine has returned to setting mode. If a new washing programme is selected, check that there is detergent in the detergent dispenser. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Press the On/Off button All the indicator lights of the programme selection buttons illuminate. 6. Cancelling the delay start in progress Open the dishwasher door and press the Delay button until the indicator lights corresponding to the delay start hours (3h, 6h or 9h) turn off. In this case the selected washing programme will start automatically after the closure of the door. 4. Setting and starting the programme To select a programme, press the programme button of the washing programme you wish to select (see "Washing Programmes" chart). The corresponding indicator light remains illuminated while the other programme buttons indicator lights turn off. Close the dishwasher door, the programme will start automatically. 7. End of the washing programme The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. When the washing programme has ended, the optical signal on the floor beneath the dishwasher's door will turn off. Open the dishwasher door only when this optical signal turns off. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Switch off the dishwasher by pressing the On/Off button. Setting and starting the programme with delay start Press the button corresponding to the required programme (see "Washing programmes" chart). Press the Delay button until the indicator light corresponding to the chosen hours flashes (3h, 6h or 9h). Close the dishwasher door, the countdown starts automatically and will decrease with steps of 3 hours. [. . . ] This warranty, the contract to which it relates and the relationship between you and Electrolux are governed by the law applicable in the Australian State where the Appliance was purchased or the law applicable in New Zealand if the Appliance was purchased in New Zealand. Where the Appliance was purchased in New Zealand for business purposes the Consumer Guarantee Act does not apply. General Terms and Conditions 1. In this warranty (a) "Electrolux" means Electrolux Home Products Pty Ltd ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited in respect of Appliances purchased in New Zealand; (b) "Appliance" means any Electrolux product purchased by you accompanied by this document; (c) "Warranty Period" means (i) where you use the Appliance for personal, domestic or household purposes in Australia the period of 24 months and in New Zealand the period of 24 months; (ii)where you use the Appliance for commercial purposes, in Australia the period of 0 months and in New Zealand the period of 0 months, (if the period stated is 0 months you are not covered by this product warranty) following the date of original purchase of the Appliance; (d) "you" means the purchaser of the Appliance not having purchased the appliance for re-sale, and "your" has a corresponding meaning. This warranty only applies to Appliances purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict, or modify in any way) any non-excludable statutory warranties in Australia or New Zealand. [. . . ]