User manual AEG-ELECTROLUX ESL6180

[. . . ] Dishwasher Model ESL 6180 AUS Instruction book Contents Important safety information Description of the appliance The control panel Before use Setting the water softener Filling with salt Rinse aid Use of detergent Using your appliance Loading your appliance The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Protection against flooding Installation instructions Water supply connections Water outlet hose connection Electrical connection Hints for test centres 3 4 4 6 6 6 7 7 8 8 8 8 8 9 10 11 12 13 13 13 13 13 13 13 14 15 15 15 15 16 16 17 Technical specifications Dimensions Width Height Max depth Max depth with open door Voltage 59. 6 81. 8 - 87. 8 55. 5 111. 4 cm cm cm cm Electrical connection Motor rating during wash Power of heating element Overall power Water supply pressure 220 - 240 V - 50 Hz 200 W 2100 W 2300 W 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Minimum Maximum Capacity This appliance complies with the following E. E. C. Directives: - 73/23 of 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 of 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. [. . . ] Crockery, cutlery, pots and pans 20 g 10 g * 4. INTENSIVE (80 MINUTES) Normal soil. Crockery and cutlery 20 g 10 g 5. Crockery and cutlery 30 g / BIO WITH PREWASH 7. Crockery and cutlery 20 g 10 g Light soil. Crockery, cutlery and party crockery 30 g / *** 8. DELICATE WITH PREWASH 30 g / Normal soil. Delicate china and crockery 25 g 5g 10. Crystal glass and glassware 25 g 5g **** 11. Crockery and cutlery This is a programme both designed to heat plates before serving or remove dust from dishes which have not been used for a long time 20 g / / / 1 hot rinse * Ideal for washing a complete load of 12 place settings with normal soil. Characterised by a duration of about 80 minutes and a washing temperature of 65°C. The time value is approximated and depends on the pressure and the temperature of the water and also by the variations of the power supply. Testing programme for AS/NZS 2007 (see "Hints for Test Centres"). ** **** Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). Characterised by a duration of about 30 minutes and a washing temperature of 60°C. The time value is approximated and depends on the pressure and the temperature of the water and also by the variations of the power supply. This is the a daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 11 Operating sequence In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. Press the "delay start" push button. The digital display will show "h 0". Press the button again to select the number of hours by which you wish to delay the programme start (up to a maximum of 12 hours). If previously half load and delay start have been selected, the corresponding indicator lights will turn off but don't worry, the settings made remain memorised. To set the time setting to zero press the "delay start" push button until "h 0" appears in the digital display. The start of the countdown will be confirmed by an audible signal and a flashing dot after the number in the digital display. The opening of the door will not stop the countdown. [. . . ] Avoid bends or kinks in the hose which could prevent or slow down the water supply. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter. 15 Note: Only for water supply hoses fitted with Lock-fast safety device to prevent inadvertent loosening. [. . . ]