User manual AEG-ELECTROLUX ESL 66075

[. . . ] Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Multitab function 18 21 21 23 23 24 25 26 Loading cutlery and dishes 26 Setting and starting a washing programme 27 Washing programmes 28 Care and cleaning 28 What to do if. Before the installation and use, read this manual carefully: · For your safety and the safety of your property. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage. [. . . ] It comes on when you activate the function. 1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a washing programme operates. After ten minutes from the end of the washing programme, the Auto Off function automatically deactivates the appliance. This helps to decrease energy consumption. DELAY BUTTON Press this button again and again to delay the start of the washing programme from 1 to 24 hours. FUNCTION BUTTONS With these buttons you can: · SETTING MODE The appliance must be in setting mode for these operations: · Only one programme indicator comes on. ­ It is necessary to cancel the programme or the delay start to go back to the setting mode. refer to 'Setting and starting a washing programme'. ACOUSTIC SIGNALS You can hear the acoustic signals in these conditions: · To activate the acoustic signals again, do steps (1) through (7). Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. The display shows the setting of the and you water softener (example: hear five acoustic signals = level 5). Press function button (A) again and again to change the setting. Fill the salt container with 1 litre of water (only for the first time you fill with salt). [. . . ] To change the selection while the washing programme operates, it is necessary to cancel the programme. Make sure that there is detergent in the detergent dispenser before you start a new washing programme. For better drying results, keep the appliance door ajar for some minutes. rEMOVE THE ITEMS FROM THE BASKETS · Let the dishes become cold before you remove them from the appliance. [. . . ]