User manual AEG-ELECTROLUX EW1230F

[. . . ] Tips and information about economical and ecological use of the machine are marked with this symbol. Our contribution to the protection of the environment: we use recycled paper. 2 Contents Warnings Disposal 4-5 5 Maintenance Door seal Bodywork Detergent dispenser drawer Drain pump Water inlet filter Emergency emptying out Frost precautions 24-25 24 24 24 25 25 25 25 Tips for environmental protection 5 Technical specifications Installation Unpacking Positioning and levelling Water inlet Water drainage Electrical connection 6 7 7 7 7-8 8 8 Something not working? 26-27 Your new washing machine Description of the appliance Detergent dispenser drawer 9 9 9 Use Control panel Controls Washing hints Sorting the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives International wash code symbols Operating sequence Programme table 10 10 10-15 16 16 16 16 16 16 16 17 18 19-21 22-23 3 ENGLISH Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation · All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. [. . . ] Enter the Menu option and select the Language setting. CONTRAST The Contrast setting allows you to modify the optical characteristic of the display. Enter the Menu option and select the Contrast setting. Use the «Change» button to set up the desired contrast level. Contrast Language ENGLISH Temp. Spin Options Change Spin Options Change Contrast Exit Temp. Spin Options Change Exit Exit A B 2. Press the «Change» button to select the desired Language. Sprache DEUTCH Einstellungen Temp. Spin Options Change Exit Temp. Spin Options Change Exit BRIGHTNESS The Brightness setting allows you to modify the backlight intensity of the display. Enter the Menu option and select the Brightness setting. Use the "Change"button to set up the desired brightness level. A B Brightness Brightness CLOCK The clock setting permits you to modify/set up the current time. It is important to keep it updated as the current END Cycle Time depends on it. Temp. Spin Options Change Exit Temp. Spin Options Change Exit A B Note: At the end of the programme if no button is pressed for approximately 10 minutes the backlight intensity goes off. 14 7 START/PAUSE button Drain For emptying out the water of the last rinse in programmes with the Rinse hold or Night cycle option . Turn first the programme selector dial to O, then select programme and depress the START/PAUSE button. Spin START/PAUSE This button has 2 functions: Start: after you have selected the desired programme and options, press this button to start the washing machine. underwear). 50-°60° for normally soiled, colour fast garments O-cold for delicate items (e. g. net curtains), 30°-40° mixed laundry including synthetic fibres and woollens. Before loading the laundry Never wash whites and coloureds together. Whites may lose their "whiteness" in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e. g. Button up pillowcases, close zip fasteners, hooks and poppers. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Remove hooks or tie them up in a bag or net. Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. [. . . ] Refer to relevant paragraph in "water drainage" section. · The drain hose is squashed or kinked. · The RINSE HOLD option , NIGHT CYCLE NO SPIN «O» has been selected. Check rain hose /filter) · Too much detergent or unsuitable detergent (creates too much foam) has been used. [. . . ]