User manual AEG-ELECTROLUX EW1453F

[. . . ] Please be sure to take note of such information. 1. The numbers will lead you step-by-step through the operation of the appliance. . . . 3 2 Next to this symbol you will find additional information on the operation and practical use of the appliance. This symbol highlights tips and information on how to use your appliance economically and ecologically. In the event that a malfunction occurs, this user manual contains instructions on how to remedy the problem yourself. [. . . ] As soon as the door indicator has gone out, the loading door can be opened. Switch off the appliance by pressing the Q (ON/ OFF) button. After the wash, slightly pull out the detergent drawer to allow it to dry. Leave the loading door slightly open to allow the inside of the washing machine to air. Important: If the washing machine will not be used for a longer period of time: Turn off the tap and disconnect the washing machine from the mains. 20 Programme tables Washing The tables do not show all the possible settings, only those most likely to be selected for everyday purposes. Type of washing, (dry weight) Energy saving programme: Cottons ç è Energy saving programme: Easy-cares í max. load1) (dry weight)2) 5kg Control knob Temperature [in °C] COTTONS/LINEN (light blue) E 60, E 40 EASY-CARES (yellow) E 40 possible programmeoptions k (PRE WASH) BIO È (EXTRA RINSE) k (PRE WASH) BIO È (EXTRA RINSE) k (PRE WASH) BIO B (SHORT) È (EXTRA RINSE) k (PRE WASH) B (SHORT) È (EXTRA RINSE) 2. 5kg COTTONS/LINEN (light blue) 95, 60, 40 Cottons/linen èë 5kg COTTONS/LINEN (light blue) 30, r (COLD) 2, 5kg G MINI-PROGRAMME (blue) 30 EASY-CARES (yellow) 60, 40 2, 5kg Easy-cares êí k (PRE WASH) BIO B (SHORT) È (EXTRA RINSE) k (PRE WASH) B (SHORT) È (EXTRA RINSE) 2. 5kg EASY-CARES (yellow) 30, r (COLD) G MINI-PROGRAMME (blue) 30 DELICATES (black) 40, 30 Í WOOL (black) 40, 30, r (COLD) 2, 5kg Delicates ì Wool/handwash 9ìï 2, 5in kg (or 15-20m2 curtains) 2kg k (PRE WASH) B (SHORT) È (EXTRA RINSE) 1) The load amount inquiry operates in accordance with the EN 60456 standard load. 2) A 10 litre bucket holds around 2. 5 kg of dry clothes (cotton). 21 Separate soaking Type of washing Cottons/linen Easy-cares Delicates max. load (dry weight) 5kg 2, 5kg 2, 5kg A (SOAKING) Control knob Separate rinse cycle Type of washing Cottons/linen Easy-cares1) Delicates1) 1) Reduce the spin speed to 700 rev/min or less. max. load (dry weight) 5kg 2, 5in kg 2, 5kg Control knob B (RINSING) Separate conditioning/starching/impregnating Type of washing Cottons/linen Easy-cares1) Delicates1) 1) Reduce the spin speed to 700 rev/min or less. max. load (Dryweight) 5kg 2, 5in kg 2, 5kg Control knob C (STARCHING) Separate spinning Type of washing Cottons/linen Easy-cares1) Delicates1) Wool/handwashing1) 1) Reduce the spin speed to 700 rev/min or less max. load (dry weight) 5kg 2, 5in kg 2, 5kg 2kg Programmwähler F (SPINNING) 22 Cleaning and care Cleaning the control panel Important: Do not use furniture cleaner or aggressive cleaning agents to clean the panels and control elements. A domestic fuse has tripped. Remedy Connect the plug to a power outlet. Close the loading door; the catch must audibly latch. Press and hold the U (START/PAUSE) button until the programme starts. Disengage the child safety device (see section "Child safety device"). Close the loading door properly; there should be an audible click. Unscrew the hose from the tap, remove the filter and clean it under running water. Check the tap and have it repaired if necessary. The washing machine does not work. The loading door is not closed properly. The U (START/PAUSE) was not pressed for long enough. The loading door cannot be closed. The child safety device is engaged. The E40 error code is flashing in the multi-display. The The loading door is not closed propl (MAIN WASH), C (END) erly. and U (START/PAUSE) indicators are flashing. The E10 error code is flashing in the multi-display. [. . . ] For pump lifts of over 1m, please contact Customer Service. 38 Installing the appliance underneath kitchen worktops Important: · The tap and power plug must remain accessible even after the appliance is in place. · If the appliance is hard-wired to the mains supply, then it must be safely isolated from the mains at the time of installation with an all-pole (N, L1) bearing separator (e. g. supply terminal circuit breaker), which has a contact separation of at least >3 mm. · The connections to electricity and water must be located to the side of the appliance. [. . . ]