User manual AEG-ELECTROLUX EWA1700

[. . . ] Never use the flex to pull the plug out of the socket but pull the actual plug. If the mains cord of this appliance is damaged, it has to be replaced by the manufacturer or its customer service or a trained electrician to avoid risks. Never use the kettle if it has been dropped or has evidently been damaged. [. . . ] Do not switch on the appliance without water. Only use the kettle with the associated base. Old appliance on the product or on The symbol its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Before using your new kettle you should wipe it inside and outside with a damp cloth due to hygienic reasons. 0 Plug the mains plug into a wall socket. Packaging material The packaging materials are environmentally friendly and can be recycled. If the mains cord is longer than necessary it can be wound up at the bottom of the base unit (G). Never fill the kettle above the maximum filling level (D). The automatic boil-dry safety cut-out can only function reliably if this is done. Place the kettle onto the base in any position you wish. Press the ON/OFF switch (E) down, the pilot lights (F) lights up and the kettle starts to heat up. [. . . ] 0 After descaling, rinse the kettle out thoroughly with clean water. Never pour descaling agents into an enamel sink and do not reuse them. Always disconnect the kettle from the mains supply before cleaning. [. . . ]